Maybe this will help.....
the following steps must be carried out in the correct order:
Press the FM 1 and AM buttons simultaneously and hold them down until "1000" lights up in the display. Release the buttons! Do not, under any circumstances, continue holding them down or press them once again. This would cause the radio to consider the number "1000" to be the input code number.
For technical reasons, the first digit can only be a 1 or left blank. The following three digits, however, may be any number from 1 to 9 .
Best to you.
You can now repeat the entire canceling procedure once. The number of attempts will be shown in the display.
If you input another incorrect number, your radio will be locked up for approximately one hour . The radio will not play. Leave the radio switched on. After an hour, the display with the number of attempts goes out and you can cancel the electronic lock-up as described above.
This cycle - two attempts, one hour lock-up still applies.
SOURCE: '98 a4 stereo code
me pueden ayudar, intente desbloquear el estereo de mi audi a4 1998 pero el codigo esta incorrecto y esta bloqueado por segunda vez. Al principio entro con el DX y FM1/2 y si entro, pero ahora que quiero ingresar el codigo correcto ya me es imposible entrar con estos botones DX y FM1/2, hay alguna otra opcion?
IMPORTANT NOTE:
You must have the security anti-theft code for your Audi Concert radio from the car manufacturer, or from an Audi dealer!
You can find the radio code at: http://www.radio-code.co.uk/
The sequence of programming for a 2002 Audi TT Concert radio is:
1. Simultaneously push "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then simultaneously push again "SCAN" and "RDS" keys to confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.
The radio is now ready to use!
--------------------------------------------------------
Audi Delta CC Radio
Please perform the following procedures while the car is parked. Otherwise you risk getting into an accident while your attention is not focused on the driving. Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
107 views
Usually answered in minutes!
×