Question about 1997 Hyundai Accent

1 Answer

My 97 hyundai accent i have change 2 back wheel bearing, But when i drive it i still hear funy noise coming from back wheels.What should i do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,053 Answers

Hello,

My name is mike, I will try and help you out best I can with out of course seeing the car in person.

If you did your own wheel bearings or had them done, the noise could be from the packing of the bearing, might not have been packed right with proper grease, or the housing around inside where wheel bearing goes could be worn out. Now, before we go there, first have your breaks checked out, sometimes the noise comes from the rotors, as if break rotors are worn or warped will sound like a wheel bearing. Even if you pads are goods, rotors can be worn or warped and cause this same similar sound. If breaks and rotors check out ok, then wheel barring housing might need to be fixed, they have have sleeves they can put in housing to help this, with out have housing bored out or replaced. I hope this helps some. Best to have this checked out like at Les swab who deals with breaks and rotors and bearings. And they are knowledgeable . I hope this helps turn you to the right direction. Mike

Posted on Sep 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai Accent 2016, 4811 km. makes grinding noice which can be heard when driving on smooth asphalt road. Noice is on for a while and then you don't hear it for a while. What can be the problem?


Wheel bearings could be the problem. While moving and steering to the left, if the noise increases, it could be the RIGHT wheel bearing. And the opposite when steering to the right. I wouldn't rule out brake noise though. Rotors almost overnight get a surface rust and must be worn off when first driving in the morning. Very common in high humid areas.

Aug 24, 2017 | Hyundai Cars & Trucks

1 Answer

How do I replace front wheel bearing in a 2008 hyundai accent?


Hi there, I think from memory the whole hub assembly comes with new bearings when you replace it, it's a easy change, remove wheel, remove the brake calliper, remove the front axel nut and the hub should come off, hope this helps, it's a easy change

May 19, 2014 | 2006 Hyundai Accent

1 Answer

2007 hyundai accent humming front end tire


Same with my 07 Accent. bought new in 07, noise started last spring 2013 at 63,000 miles, a year later at 97,000 getting louder but still rolling along, high speeds and pulling a trailer some of the time. Cannot believe a bad bearing would last that long.

Mar 19, 2012 | Hyundai Accent Cars & Trucks

1 Answer

What cause noise on my back wheel when I brake. The noise so bad.


this is a front wheel drive car. so the only things in the rear wheel area that typically make noise would be the rear brakes or the wheel bearings. Because you notice it more when braking i suspect the brakes are worn out. inspect the brake pad wear on both the inside and outside pads, if they look ok, you would need to investigate further for a possible wheel bearing or hub issue.

Feb 24, 2012 | 1996 Hyundai Accent

1 Answer

Humming noise while driving from left side wheel


Hi and welcome to FixYa!

If you feel that humming noise then it's definitely a worn out wheel bearing. It is connected on the wheel hub. You will need to remove the CV (constant velocity) joint to gain access to the wheel bearing. Have it replaced to get rid of the humming noise.

Hope this helps and thank you for using FixYa! Have a good one!

Feb 13, 2011 | 2000 Hyundai Accent

1 Answer

My 2000 hyundai is making a loud noise all the


ANY NOISE FROM A PULLEY MEANS A BEARING IS GOING OUT. IT WILL BREAK AND COST ALOT MORE TO FIX AND MIGHT EVEN CAUSE YOU TO LOSE STEERING. IF IT IS A WHEEL BEARING IT COULD LOCK A WHEEL UP ARE EVEN FALL OFF. PLEASE GET THIS CHECKED

Feb 11, 2010 | 2001 Hyundai Accent

1 Answer

Bearing trouble


Ouch, get your wheel bearings checked. I had a 97 Hyundai and in the 3 years I had it, the front bearings had to be replaced twice and the rear once once.

Sep 28, 2008 | 1997 Hyundai Accent

1 Answer

Front wheel bearing/break


Could be a wheel bearing that is starting to have trouble - you won't always hear it right as soon as it starts to fail. If it is a wheel bearing though, very soon you'll start to notice a rumbling noise.

Aug 10, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
1997 Hyundai Accent Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...