At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My Jaguar 1995 xj6 will not start. battery went completely deady. New battery. Fuel is not getting to the injectors and its not firing. Checked all fuses. Does security system have to be reset?
Reset security by locking wait for beep unlock security now reset an car should start. This has happened to me.Reset security by locking wait for beep unlock security now reset an car should start. This has happened to me.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the crank sensor is favorite they are unreliable that explaines why the trans not getting engine speed signal unless its a manual box and that code will allways be logged advise start by checking for water ingress in engine control module located lower rh a post then change crankshaft position sensor or better still try and borrow one from a good running car
Its issue with fuel filter.Have you also replaced the fuel filter too.If its blocked then it can also cause this problem.Also in some cases its seen that new fuel pump comes out faulty.Was it original fuel pump or aftermarket fuel pump.Get the fuel pressure checked.If the pressure is low,then it can be issue with the new fuel pump.------------For more help Click the link below:-----http://repairhelpcenter.blogspot.in/2012/05/jaguar-fuel-pump-problems.html -------------This will help.Thanks.
During cranking @crk sensor u should see up to 1 ac volt. Also if cam position sensor is @ fault u may not get a code, internal fault. Cam sensors are not availible,but rebuild kit is availible. The engine has to be set to top dead center aligning mark on crank pulley & tab aswell as mark on cam sensor itself.
Yes you can check the Crank & Cam Sensors they can control spark and fuel. You can test them by finding out the normal resistance and then testing yours for their resistance. Do you have a way to scan the car? Did it quit while driving?
Fuel pump is working. We wired it straight and it is pumping.
Reset security by locking wait for beep unlock security now reset an car should start. This has happened to me.
×