Cars & Trucks Logo

Related Topics:

Anonymous Posted on Sep 10, 2011

Timming belt broke from water pump broke while driving car put new water pump on n timming belt but car doesnt start right plus shakes doesnt sound right 2001 neon dodge

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 5 Answers
  • Posted on Sep 10, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Sep 10, 2011
Answers
5
Questions
0
Helped
1988
Points
14

Sounds like timing belt not on correctly. Check timing marks are aligned correctly when installing timing belt. This vehicle should have 2-3 marks to be aligned when installing belt.marks should be on cam gear/ crankshaft gear and intermediate shaft if engine is equipped with it.

  • Anonymous Sep 10, 2011

    Sounds like timing belt not on correctly. Check timing marks are aligned correctly when installing timing belt. This vehicle should have 2-3 marks to be aligned when installing belt.marks should be on cam gear/ crankshaft gear and intermediate shaft if engine is equipped with it.

×

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Dec 17, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Dec 11, 2012
Answers
1
Questions
1
Helped
690
Points
1

Check compresion code have valve damege if belt broke

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Drive belt tension shaking mercury mastique

Just because you replace hose, this should not have overheated engine. You need new automatic tensioner pulley.

Because you overheat, you need to have a pressure test done, you could have warped the heads.

Replace tensioner, get pressure test, make sure coolant level is right, check to make sure fan's come on when engine reaches temp after thermostat opens. Now after all test check ok, belt not slipping, see if you still lose power.
0helpful
2answers

I have a 2001 Rav4 and a belt broke car over heated and water leaked out alot

your timing belt broke and sounds like it broke due to a seized waterpump needs new timing belt and waterpump hope this helps
0helpful
1answer

P1296 Problem(vw jetta 2001 wolfsburg edition)

There is a common fault with the cam belt driven waterpump on VAG engines as they use a plastic water-drive. The water-drive on the pump shaft breaks up or free and no longer circulates the water. Replace water pump.
5helpful
2answers

I changed my timing belt, water pump and I belive the harmonic tensioner when my rodeo turned 100k. A year later I heard a knocking noise coming from the area where the timing belt is located. The noise...

Yes its the correct name. Yes it should have been replaced..... but its up to the mechanics advice and the customer. its not normally replaced, but I replace all parts including the water pump, just as a matter off service, to avoid your exact problem.
0helpful
2answers

The fan belt came loose while driving and then water started to flow from under the engine does this mean the head gasket might of gone

if the fan is on water pump, then I would say its a bad water pump, look under pump while running and if its bad it will leak from bottom. it may be a hose under car as the belt broke. and it over heated if water pump was not working.
0helpful
2answers

I just recently had my water pump changed & when i picked up my car it was constantly shaking when i would accelerate when i was waiting at a light or when i turned it would stall a little. When i...

should have brought car back to mech [dont know how long ago pump put on] if it was not running right after work was done on it -mech may have left off or knocked something loose -ur problem sounds like a vacuum line
0helpful
1answer

The timing belt broke on our 95 elantra and im fixing it how cam

you need to get a diagrm . try googel . timming marks for your car . if the belt broke while driving more then likley there is engine damage
1helpful
1answer

Broke brand new belt

youve got a pully locking up,all except the crank pully should spin freely by hand if there good
0helpful
1answer

HOW TO INSTALL A TIMMING BELT ON1991 VOLVO740

REMOVED ALL BELTS, WATER PUMP FAN, SHROUD AND PULLEY.
REMOVE TIMING COVER REMOVE CRANK SHAFT PULLEY.
. PUT ENGINE IN TOP DEAD CENTER SO YOU CAN SEE TIMING MARKS. REVERSE PROCEDURE. GOOD LUCK
Not finding what you are looking for?

700 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...