Starts will not come out of park and the lights will not come on or the brake lights wont work but the turn signals work

Find the cause of no brake lights and the park lock will start working, it is powered by the brake light circuit.

Possibly the brake switch itself. Many cars come equipt with a safety feature that won't allow shifting from park unless foot is on the brake. If you have a bad brake switch, this could prevent you from shifting from park as well as giving the impression that the brake lights are bad. hope this answers your question. All the best.
Greg

This problem sounds like you dislodged the switch on the brake pedal lever. You need the signal to unlock the vehicle from Park. You will probably find that the Brake lights do not work when you press the brake pedal.

Now if the switch is good, you probably broke the fuse feeding power to the switch. You can get a wiring diagram online by running a Websearch or going to Autozone.com and registering your car. This site has a HELP section at the bottom of the page and you would need to toggle between free and pay info.

Turn signal tail lights and BRAKE LIGHTS NOT WORKING

It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----

==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----

Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

You may have damaged something with the spray, just start looking and testing the system to see were the starter signal stops.

u need to replace the turn signal switch also known as the multifunction switch in the steering column. the brake lights go thru there.

The element are serpent in the lights bulb the turn signal and brake usually share the same one but the running or park light are not shared with the turn . so if none of the light for the turn signal light then you will want to look for your flasher control it is ether in or near the fuse box or under dash by steering wheel shaft,,you should also check grounds at light socket if we can be of any further assistance please feel free to ask hope this gives you a place to start .Thank You..

Sounds like you 've got a cross connection in the rear right taillight bulb, or wiring to that area.
Start by pulling the bulbs out and checking if it makes any difference with the bulb removed. Check the brake pedal...see if the parking lights still come on.
Look at the bulb socket contacts, and the bulb contacts and look for black marks, or burned out filament in the bulb.. if everything looks good there, start tracing the wiring back and look for cuts or a place where the wiring may have been pinched, cut, bared etc. if your right turn signal isn't working and the parking lites are getting triggered, it's got to be in that right rear taillight or wiring...

Your vehicle has a safety that wont allow it to nmove from park without the brake pedal being pressed. thats a good place to start

Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.