At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Signal lights work but stop aftrt a few blinks
You need to replace your flasher cam, to find this you need to turn your indicators on then look around under the dashboard for the thing making the tick tick noise, this is your flasher cam.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Get the left signal to flash fast then walk around the car to see which light isn't flashing then change the bulb or socket if they all appear to be flashing (front and rear) turn on the right turn signal then look into the front and rear lens and count the number of bulbs flashing, now do the same thing on the left. Many times there's more than 1 bulb in each lamp. I hope this helps. Take care.
- Hazard lights work when ignition is turned OFF.
- Signal lights Don't work when ignition is turned off.
- Is it possible that the Right signal bulb is burned out?
- I'd be checking the functions of all of the bulbs.
How did this problem start?
Please reply as a COMMENT to this post.
Cheers.
-Most likely the turn signal relay is bad.
-Check it out and replace with new one if it is. You can do yourself. Most car the flash relay or turn signal relay is locate inside under the dash of the driver side or on the kick panel of the driver side. If you see it then just unplug and plug in new one.
most likely its the turn signal relay. which is under the hood. in the fuse box. also make sure ur running lights are working if they are connected to the turn signal.
What other problem did you have before the signals quit? Something that stopped all functions from the signals has to be either a feed or ground IF the flasher is good. Signals feed. Hot wire from the flasher 1 and it should blink underload, but not with a test light or DVM. In other words using a test light the flasher wire should be powered steady. All the rest of the switch is switchable. You should also get a hot wire when the brake pedal is pushed. Check for power at the brake switch,key off.
×