Lost my keyless entry remote and key to 2010 hyundai eleantra

2010 Nissan Frontier key fob programming
google
here is a link copy and paste
https://www.youtube.com/watch?v=z8qagxqOOR8

https://northcoastkeyless.com/2010-nissan-frontier-keyless-entry-remote-fob-programming-instructions/

You will need to seek out a professional to program your 2005 Hyundai Tuscon keyless entry remote since it requires special equipment to program. I would suggest calling a few local locksmiths and price shop, they are usually a bit more affordable than the dealer. Better yet, if you have a mechanic you usually go to, see if they can do it for you.

Another way to save some cash with keyless entry remotes is to Purchase A Key Fob online.

Yes. After market remote start kits don't care about keyless entry or alarm systems. You will get a separate key fob to operate the remote starter.

1. Cars
2. Car Maintenance
3. General Car Maintenance
4. How to Program Keyless Entry Remotes in a Hyundai Sonata

How to Program Keyless Entry Remotes in a Hyundai Sonata By Christian Killian, eHow Contributor

• ? Pin
• ? 9
• ? Tweet
• ? Stumble
• ? Share

20Found This Helpful The keyless entry system in your Hyundai Sonata is part of the factory alarm system. If you have to replace a lost or damaged remote, reprogramming will be necessary. The remote is important because not only does it lock and unlock the doors, it also arms and disarms that factory alarm when you open or close your car doors. New remotes are available from any Hyundai dealer. While they will program it for you, you can do it yourself and save a programming fee.
How to Program Keyless Entry Remotes in a Hyundai Sonata(Kleophaus Livingston/Demand Media)

Other People Are Reading

• How to Reprogram Key Fobs Yourself
• How To Replace a Hyundai Sonata Remote

Step 1: Locate the fuse panel under the dash on the driver's side of the car. Just below it is the control module for the factory alarm system. Open the cover on the alarm system control module and locate the memory switch inside.
(Kleophaus Livingston/Demand Media) Step 2: Verify that the switch is in the "Off" position; if it is not, switch it to the "Off" position. This is important for the system to understand what you want it to do when you move to the programming mode.
(Kleophaus Livingston/Demand Media) Sponsored Links

• Download New VersionSnagit 12 Image & Video Capture. Edit & Share. Try Free Today!
  techsmith.com

Step 3: Insert the key into the ignition of your Sonata and turn the key to the "On" position. Wait for 60 seconds, then move the memory switch inside the control module to "Set."
(Kleophaus Livingston/Demand Media) Step 4: Depress and hold the "Lock" button on your remote for one full minute. This allows the remote and the control module to communicate and sync. Release the "Lock" button and turn the memory switch in the control module back to the "Off" position.
(Kleophaus Livingston/Demand Media) Step 5: Turn the ignition switch to the "Off" position and test the remote by pressing the "Lock" or "Unlock" button, verifying that the doors do lock or unlock.


Read more : http://www.ehow.com/how_6362326_program-entry-remotes-hyundai-sonata.html

the operators guide covers this.
lost that? (in the glove box is was)

I have the 2010 Toyota Venza push to start. I lost the original key, so i bought a new key with the remote and its was programmed successful but this remote only had the three buttons on it, instead of four buttons ( Including the Hutch button). So i bought another new remote with the four buttons today and I want to know if it will work when i switch the programmed key into the new remote?

There should be an alarm fuse, you can pull that to shut it off. A GM dealer should be able to set you up with a new keyless entry remote. I'm not sure which fuse it is, but the service manual should tell you. If not, the fuse block cover may tell you as well. Good luck

Just a guess,would wrapping it in tinfoil work?A small metal box?

A lock smith can come to your location and make you a new door key . and you can buy a new remote from the toyota dealer if it was a factory alarm .

who ever replqaced your battery failed to do it properly. You have to supply a voltage (usually thru alligator clips to the battery cables) so the memory is not lost in the keyless entry system , dashboard, & radio which all now need to be reprogrammed by a Hyundai dealer