SOURCE: Want to replace fron in 93 ford probe
1993 is a split year, if you have charging ports are a little bigger than the size of a tire valve stem then u have R12, if they are big then you have R134, most all Ford in 93 use R12. In the picture are adapters for a retrofit to R134, these screw on an R12 port, note the large cap R134 cap on the end of the adapter.
SOURCE: 94' Ford Probe Automatic Transmission fluid check question
The car needs to be running with the transmission warm, (drive around for at least 10 minutes) Place the car in neutral. Pull the stick wipe it off and place it back in the transmission. Reads just like an oil stick, want fluid in the safe range (checked pattern) area.
SOURCE: i cant seem to get the timing right on my 93 ford
Mark the direction of rotation on the timing belt in case you need to re-install the original belt
Cam and crankshaft sprocket alignment positions for the 2.0L engine
Rotate the crankshaft until the timing marks (arrows) on the camshaft sprockets align with each other
Please don't forget to rate
SOURCE: I just rebuilt my E4OD TRANSMISSION ON A 93 FORD
A couple of possibilities: Sun gear is cracked or gear is stripped or your valve body has a sliver of aluminum or dirt in it allowing valve not to move.
SOURCE: Looking for a diagram for a ford e4od transmission
Rebuilding an automatic transmission requires more than looking at a diagram. Check out faxonautoliterature. They have the original Ford service manual for your truck and it will have all the information that you will need to rebuild your trans properly. Hope this helps.
68 views
Usually answered in minutes!
×