The windshield fuse pump is not working, The wipers are working and the little tank is filled with water. But when you try to clean it with the water it doesnt come out. Its a scion tc 2007. What can i do to fix it?

Fuses, but not mentioned as it goes via Wipers

2009 Ford Escape windshield washer not spraying? - iFixit

https://www.ifixit.com > Answers > View > 2009+Ford+...
Mar 2, 2015 - The pump is bi directional and is fused thru the front windshield wiper fuse. If the wipers work but the pump doesn't, ether the pump is bad or ...

Ford Escape (2008-2012) fuses and relays

https://fuse-box.info > ford > ford-escape-2008-2012-f...
The fuse panel is located on the right-hand side of the center console, by the instrument panel behind the cover. The location of the fuses in the passenger ...

the washer fluid could be empty / the fuse for the wiper blew / the relay went bad /if you tried to use the wipers without clearing ice away you blew the fuse/ if you just put water in instead of washer fluid it's frozen/ if the wiper works and there is windshield fluid in the tank and not water and all fuses are good the pump motor for the fluid went and is easy to change

Sometimes disconnecting the battery does more damage then you want it might have trip a fuse or relay check those if thats not it, maybe wiper motor or transmission went out.

HOOK TEST LIGHT TO WASHER PUMP MOTOR ELECTRICAL CONNECTOR FIRST DISCONNECT ELECTRICAL AT WASHER PUMP MOTOR.NEED A HELP TO WORK WIPER WASHER SWITCH.IF TEST LIGHT LIGHT UP WIPER WASHER MOTOR FAULTY.IF TEST LIGHT DONT WORK.YOU HAVE FAULTY WIPER WASHER SWITCH OR FAULT IN THE WASHER WIPER POWER MODULE IF WIPER MOTOR NOT WORKING YOU HAVE A BLOWED 30 AMP FUSE OR BAD WIPER MOTOR RELAY.

The most common problem I find in this season, is having summer 32 deg. F freezing windshield wiper fluid in the tank rather than -20 deg. F freezing windshield wiper fluid.

Try to warm up the car by parking it in a heated garage until the windshield wiper fluid thaws. Then, try to use it all up, and add the 'winter' vs. the 'summer' formula of windshield wiper fluid.

If this does not solve the problem, the pump might be burnt out, in my experience.

You should hear a humming sound as you depress the button for windshield wiper fluid inside of the car.

Good luck on this repair.

First of all, try to warm up the car to above 32 deg. F so that any ice may melt in the pump. Check that you have -20 deg. F windshield wiper fluid vs. the 32 deg. F fluid for the summer. Flush out any summer windshield wiper fluid. This will help to get it ready for winter which is already in full force.

If you still can't hear the pump humming or spinning, then try to replace the pump which is located in the plastic tank in most cases.

The fuse usually will not blow on the windshield wiper pump in my experience.

The pump either is frozen with water or is burnt out.

Check you pump fluid maybe is not work (listen when turn on)

With a clip, clean the hoses in the windshield ejectors-water.

Good luck.

remove the pump, there is a screen filter on the pump itself and it gets clogged very often.

the pump wire is probably not making good connection with the pump that is why the washer fluid wont work try and clean the connection. the pump is located under the fill tank

check for a bad relay for the wipers not working. the relay will be under the hood or under the dash next to the fuses. the cover will tell you what piece is the relay. the relay controls the delay in the wipers so that is probably bad and you can get them at napa for cheap. and simple to install its just like a fuse.

While you were filling the tank you may have disconnected the pump wires. If you can hear the pump activating when you use the switch then the pump may have gotten clogged , check for sediment in the tank.  For the person with the mustang - if its only coming out of one side then its a nozzle clogged or a pinched hose.