SOURCE: how does one replace interior overhead lights?
the plastic lens that you press to turn the light off and on can be remove with a pick or small screwdriver pry from the outer edge of it and it will pop off. the light will come out with the socket by twisting.
SOURCE: 2004 chrysler sebring.The driver side rear door electric window
you have a bad window regulator assembly
SOURCE: had windshield replaced now radio power locks and
Was the original windscreen a heated windscreen?? If so, has the wire that feeds this been trapped causing a short which is blowing a fuse which also feeds the dead items?? Maybe theres an inline fuse for these items located in the kick panel. If it was fitted professionally, I`d have a word with them, they should sort it out, they caused the problem, not you. Ian
SOURCE: My 2004 chrysler sebring electical is not working.
Check around the MAP sensor area for any connections that may have been disturbed while you were replacing the sensor. Most or all of those functions are controlled by the body control module. I would think that a fault like that would show on the scanner readouts.
SOURCE: oil sending unit on 2004 chrysler sebring V6
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
290 views
Usually answered in minutes!
×