Ist there a way to start a 1996 range rover without key.

Try locking it with the fob, then unlock it with fob. If the antitheft is engaged, the light will stay on or flash.

Lock doors with the key. Take out key . Insert key open and close lock 5 times then on the fifth turn open door this will reset the disable code to normal . I had this code on my P38 Range Rover and the Rover Tech assisted me with this simple way to reset the engine disable fault code . Good Luck .

Sounds like the throttle body is gummed up, or the idle air control valve is not working.

i got the code but how will i key in to the car stereo

So the car does not start after getting a new key cut correct? If you have the title to the vehicle, take it to your local Land Rover dealer and they can cut you a new key. Does the car have keyless entry/anti theft from the factory? If so they key will need programmed by the dealer.

1996 Land Rover Range Rover SE 4.0 liter V-8 VIN "2"



Remember rated this. Good luck.

try jiggling the steering wheel til it clicks or moves and then try moving the key

Immobilizer system can be disarmed using 4 digit code from vehicle security card as detailed in owners handbook.

Yes without the cam signal it doesn't know just when to fire the respective spark plugs

This car is in super lock mode... when you press remote 2times to lock or when you lock with remote and try to unlock using key manually.

there is a 4 digit number to open the door, its like opening a safe, starting from the left(key in car door) it goes L/R/L/R. so if number code is 1234..... left 1, right 2, left 3, right 4.

or if this too troublesome you can ask landrover dealer to remove the KEYCODE.

happy trying.....
adrian/kk.