Mycheck engine light came on in my 2006 Hyundai accent. Car runs fine

torque hyundai accent Questions & Answers - Fixya

www.fixya.com > Forum > Tags

Torque specifications for cylinder head 2000 hyundai accent Are you aware that ... cover gasket on my 1997 Hyundai Accent GLS (engine code G4EH, 1.3L).

Hyundai Alpha engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Hyundai_Alpha_engine

WikipediaG4EH in a 1999 Hyundai Accent L ... lb·ft (132 N·m) at 4000 rpm, although some websites quote the torque rating as being 97 lb·ft (132 N·m) at 2700 rpm. ... 1992 Hyundai S-Coup? LS specifications - Carfolio.com · 1992 Hyundai S-Coup? GT ...

[PDF]AERA Torque Specs

www.aera.org/uploads/4/3/7/7/43776611/aera-torquespecs.pdf
AERA Torque Specs. 500 Coventry Lane, Suite 180, Crystal Lake, IL 60014. Toll-free Technical Hotline: 1-888-324-2372 (1-88-TECH-AERA). 815-526-7600 fax ...

.

Torque Specifications - AutoZone

www.autozone.com/.../Hyundai.../Specifications/Torque-Speci...

AutoZoneTorque Specifications. Print. Specific to: Hyundai ... Specific to: Hyundai Accent2006. Hyundai Azera 2006. Hyundai Elantra 2006. Hyundai Sonata 2006.

Club Accent Qu?bec • Consulter le sujet - hyundai motor s

Dont drive a car with the light flashing. A flashing check engine light means that something is really wrong and you can damage the engine if you drive it.

I'm having the same problem now with my car as well did you find out what was the problem with yours?

Engine Light 'ON' is a warning light from the inbuilt system. As far as your car is driving good, no need o worry about the light.

This is from the electronic control unit signal. This can occur due to some sensor performance present in the engine. Take it to the nearest dealer. They have a diaganosis unit to fix it easy.

Please remove battery connectors for 5 minutes.

Also replace the fuel tank cover.

Cheers.

I have a 2006 Accent and also to me sometimes the eps light turn on while I'm driving. I turn off the car and wait few seconds before to turn on again. But how to repair this problem?

big red
if you have not had problems with your car the most probable thing is you need to replace your maf sensor you can also jut remove it and cleane it with alcohol then reset your cars computer by removing the positive cable from your car for about 2 minutes and placing it back it will clear the engine code

yes you have an engine misfire, probably a bad spark plug or plug wire, maybe a coil issue, do not continue to drive it or you will do severe damage to the catylitic converter

ive got a 1994 1.3 accent and now its spluttering was does it mean ?