Cars & Trucks Logo
Posted on Sep 06, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Blazer 98 4x4

My chevy doesnt start. have a mistake in alarm. no function the pulsations injectors. no start.

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 79 Answers
  • Posted on May 18, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

Joined: May 17, 2009
Answers
79
Questions
1
Helped
69093
Points
313

I would check the basic things first. Battery Terminals, the Battery itself, gas in the tank, then the probable cause a faulty fuel pump. A quick check of this is to take the air horn t-nut off the 3 inch t handle screw which holds it and spray starting fluid in the throttle body. Do not open the throttle body like an old careburator just spray it in their, put the air horn back on and if it starts it's a probable fuel pump. You can also try to turn on the key three times but do not start it those three times just see if the fuel pump sounds like it's working. On the third try turn the key fully on and if it starts it's a probable fuel pump. If so Google under 100 dot com and they have blazer fuel pumps for 60 or 70 dollars. A fuel pump from an auto parts store will cost you from 250 to 300 dollars. I wish you the best of luck becuase I have replaced four fuel pumps in my own blazer. Good Luck!!!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Security light doesnt flash when i open the driver door on 2000 chevy blazer

ummm was it active? is it an aftermarket install?..check with alarm company manufacturer..unless its a dealer item..
0helpful
1answer

My 96 s10 blazer has fuel pressure to the injectors whitch are spider injectors but will not start

I had a 2000 chevy Blazer that had the same problem. I ended up replacing the spider injectors from the local parts house and solved my problem. The computer was sending to open them but they didnt in which it wouldnt run. Hope that helps.
2helpful
2answers

I have a 1999 chevy blazer that will turn over but won't start. prime with fuel runs untill it runs out. have code of p1351 in it

Need more info.......It could be the injectors are not pulsating...Check to see if it is spraying fuel from the injectors....If not it should be a clogged fuel filter or a fuel pump....It is almost definite though that it is the fuel pump/sending unit in the tank ...IF it is not spraying from injectors....
Disconnect battery remove main fuel line going in the fuel filter under vehicle frame at drivers side..with drain pan under it of course...Reconnect battery turn engine over and watch for fuel...
You will need an assistant...Most people think fuel is under great pressure but it is not.....If everything works the fuel will come out in a stream...But it wont come out like a bullet...
If fuel comes out Fuel pump in tank is good...Then your problem is at the injectors ...I would change the filter of course anyway...unless you just have...You will see rusty dirt come out of it if it is clogged...It is always good to change fuel filter every 15,ooo....Todays fuel is terrible...I would first check or swap fuel relay with a new relay or identical relay in fuse power block ...Make sure they are all good....................What engine and how many miles ? Hope this helps....Metalpoet
0helpful
1answer

The injectors not working

there is i fuse for the injectors 1 wire feeds all 6 it is 12 volts there are 6 wires leave the ecm and feed the pulsation of that injector when its needed . if injectors dont work check fuse first the wires from ecm to wire loom to injectors
0helpful
2answers

2000 mitsubishi diamante has spark has fuel up to the injectors and power but wont start.

At injector's, need to check if you have ground pulsation, to check, connect test light on pos (+) battery terminal, now your set to check ground, at injector harness, probe wire's, while some one cranks engine, look for pulsation, if you don't have pulsation, it will need a computer, injector pulsation is control by the computer, if no pulsation, then no fuel can get into cylinder.
0helpful
1answer

My 2000 chevy blazer hesitates when accaleration and doesnt start

YOU NEED NEW SPARK PLUGS AND WIRES.CLEAN THE FUEL INJECTORS.BUY A BOTTLE OF INJECTOR CLEANER POUR IN FUEL TANK OF GAS ALSO.CHANGE FUEL FILTER THIS LITTLE TUNE UP SHOULD HELP.
0helpful
2answers

I have a 96 chev blazer it had a leaky fuel line i replaced it it fixed the problem , after a few months it wouldnt start so i sprayed starting fluid and it got me 60 miles now wont start i replaced fuel...

Injector pulsation in control by your E.C.M quade driver none repairable computer just get's replace to fix the problem, good luck. Also one more thing check your E.C.M fuse.
1helpful
1answer

I have a 96 blazer that wont start i check for spark i have spark a full tank of gas u can hear the fuel pump come on i checked the fuel perge line shes getting gas but alls shes doing is turning over

Try squirting some starting fluid in the intake and see if it starts if it starts then dies its lacking fuel this could could be that the crank position sensor could be bad. Do you have any codes and have you had them extracted( check engine light is on).the fuel pump may be working and you may be getting fuel up to the fuel rail but if the injectors are not getting the signal to pulsate you will not get any fuel in the intake so check the crank position sensor.Try this first if this doesnt do it check the timing how many miles are on the vehicle if it has high milage it may be in the timing belt. If this has helped you please rate my assistance towards you thank you.
0helpful
2answers

Wiring diagram for 92 chevy blazer

My 1992 Chevy blazer s-10 starts and then the door locks automatically starts locking and unlocking...It wont stay running either...
Not finding what you are looking for?

269 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...