At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
All lights work including left and right turn signal. However, the break lights do not come on when you push the brake peddle. It is a 5 speed manual trans.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The break switch is right at the break peddle, when you press the break peddle it pushes a small pin on the switch to make the break lights to turn on. Hope this helps you.
I suspect there is a problem with the turn signal/ hazard switch. turn the turn signal on left or right, if it doesn't flash, grip the hazard button and gently wiggle it around, if the signals start flashing, replace the turn signal switch. The Brake lights are wired through the turn signal switch, if the 3rd brake light works, the brake switch is OK. I don't think it has anything to do with the anti theft system (at this time)
Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.
Check your fuses of course,you probably did.Listen your not going to believe this,the wire at the brake light switch can be bad.sometines the wire can break inside the vinyl cover just a milameter.use a test light for presence of voltage at the switch and check a few inches back to see it voltage is present. MAKE SURE YOU HAVE VOLTAGE AT THE SWITCH!
check for a crossed filament in the brake lamp bulbs on the right side. have seen this many times before- usually at 5:00 on fridasy when i was on the way out the door
good luck
×