SOURCE: 1997 Toyota Camry Lost All Battery Power
I would check your main battery terminals to make sure they are not loose. Sometimes, even when you have reconnected them properly they may not be tight enough to make a good electrical connections...I have seen it a million times and I have also been a victim myself :) If you shake them and they swivel at all that may be your problem. Sometimes another way to tell is if you can move them around and the car starts one time, then later that day or sometime down the road the car wont start again this is a sign that the connection is your problem. You should definately try this first, then go from there.
SOURCE: My car won't start be cause the alarm sounds as soon as i turn ke
I have a 95 camry 2.2 and it did the same thing. i helped jump a buddy's car then the horn started sounding. so i called the parts service for toyota they told me theres a switch under your dash, on the floor board, right above where the left is placed. there was a switch, he told me to flip it then my car started working no problem. that was about 1 yr 1/2 ago.
SOURCE: Disconnected battery cable but now it won't start?
there is two wires coming out of the positive cable and when you unhooked the cable the one that feeds your fuse panel may have came un plugged.
SOURCE: The car alarm keeps going off in my 2006 Toyota
Hi,
Something you need to be aware of here is that the factory alarm on your
prius only detects doors, this meaning if any of the 4 doors, the hood
or the back hatch are opened then it detects this and monitors the door
positions, if the alarm is armed and a door is either unlocked or opened
unauthorized then it sets this alarm off. You can jump on the roof or
ram the car with a dump truck and it will not set the alarm off, the
factory alarm does NOT detect impact, it only detects door lock/unlock
and door open/close. The only way this alarm will go off (other then if
you press the red panic button on the remote) is if a door is either
unlocked or opened without the use of a key/remote.
The door entry switches would need to be played around with here and a
scan tool with data lists are needed, I have seen some cases where the
bolt that holds the door switch to the body is loose and causes this.
The Factory Security system has many customizable features that can be
turned on or off or adjusted. The Dealer has the ability to do this for
you. I would first have them diagnose why it is setting prematurely.
Perhaps the sensitivity is set too high. Have them make the adjustments
and see how it goes.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
149 views
Usually answered in minutes!
×