How to fix brake lights always on, on a 2002 hyundia accent

More images for Where is the cam sensor 2002 hyundai accent 1.5


Hyundai Crankshaft Position Sensor Removal - YouTube

? 3:42
https://www.youtube.com/watch?v=0YLYDU_5w8w
Jul 12, 2012 - Uploaded by richpin06a
Hyundai Elantra Crankshaft Position Sensor Removal.

Hyundai accent 2001 - YouTube

? 2:44
https://www.youtube.com/watch?v=fzqMNho3xIU
Nov 25, 2012 - Uploaded by mig dups
2000 Hyundai Accent GS turns over - no start. ... HyundaiCrankshaft Position Sensor Replace Timing Belt ...

http://www.2carpros.com/questions/hyundai-accent-2002-hyundai-accent-crankshaft-sensor-location

check brake fuse. if its good then you need a new brake light switch, its located on the stering coulom above the brake peddle

Fuel Level Sensor open circuit. Replace the Fuel Tank Level sending unit.

If you brake in snowy or rainy roads it will do that. Or if you break too hard

could be alternator

Back side of the vallve cover (cam cover)

hi from uk after supporting car on stand or blocks ? remove wheel then you will see x head screwsx2 remove screws then release handbrake drum should now rotate freely you may need to lightly but firmly tap the drum off the hub if you have an old vac ? use it to vac the dust from shoes and drum ? if your shoes are ok ? then make sure the auto adjuster is free and clean? if your h/brake travel is high and the reason for checking brakes? then notch up auto adjuster a couple of clicks at atime whilst keep trying the drum fits so the shoes are just enabling rotation of drum by hand then press b/pedal a cople of times to centralise shoes to drum ? if drum still rotates freely with no binding on shoes ? then re assemble carry out same proceedure on other side ? do not adjust brake cable! unless you do adjustment as above you may/will find your h/brake is better /less travel ? also your foot brake will feel better and less travel ? hope this helps you but if you req further info/assistance by all means come back to board best wishes from lancashire uk

more then likely its a wheel speed sensor setting off your abs light

are you doing this on the ground or on a lift