1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.
If this doesnt work, you may have a failure in your system. If the security light is on, and the reprogram doesnt work, you might want to look into bypassing that antitheft system.
http://vatspasslockpasskeysecurityhelp.yolasite.com/
SOURCE: programing new key fob fo 1998 dodge durango?
To program your vehicle's key fob you will need a scan tool. Select PROGRAM RKE on the scan tool and follow the instructions on the scan tool screen.
SOURCE: programing a key fob for a 1999 ford escort
call a lock smith he can make you a new key.Or go to the dealer with your VIN # or the number found inside your glove box.
SOURCE: need programing instructions for 1996 Cadillac Eldorado Key Fobs
go to your owners manual it should tell you just how to do it.
SOURCE: programing fob
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote.
Thank you for using Fixya and good luck
407 views
Usually answered in minutes!
×