Saturn SL - Recent Questions, Troubleshooting & Support
98 saturn sl1 won't start
If the problem occurs after the car has been driven long enough to reach normal operating temperature, the problem is the starter. If the 'no crank' occurs cold, retest the battery.
99 Saturn SL no overhead lights or lights on 'ding'
this device might be on a relay check under the hood for a power distribution box.. and see if there is a relay for this .. under the lid of this box is a diagram telling you which relay is which .. thanks Jerry
Car won't start when i
do you hear a hising noise if you dont your fuel pump is shot but if you do check your spark plugs and wires..also have some one give you cables see what happens
2002 saturn sl1 camshaft position sensor
I hate to tell you this, but there is not Camshaft Position Sensor on any 1.9L
Single or Dual OHC. I assume you had someone read a Diagnostic Trouble Code
from your PCM. They probably told you that you needed a Camshaft Position
Sensor, and then offered to sell you one. I would recommend changing your spark
plugs and your plug cables with FACTORY REPLACEMENTS. This will usually make
the DTC go away. Aftermarket plugs and wires rarely work well for this engine.
If you are looking for a CRANKSHAFT position sensor, look between the engine
and transmission on the back side of the transmission. It is also known as the
"transmission input speed sensor". More often than not though, your engine will
not fire up if the Crank position sensor is not working. Hope this helps.
I need to replace rear brakes for 2001 saturn
Your car came with 2 types of brakes for that year here is the DRUM BRAKE REMOVAL. I will have to send it in 2 posts since the text is too long to send it in 1 post. Please vote if this helps you:
Remove the wheels and brake drums.
Remove the lower return and adjuster springs using a universal brake spring remover. Do not over extend the springs or they will damaged and will need to be replaced.
Compress the leading brake shoe hold-down cup and spring while removing the pin from the rear of the backing plate. Release spring compression, then remove the hold-down cup and spring.
95 saturn sl
gear shifting hesitates, what could this be?
Assuming it is an automatic transmission, I would look into that first. Check the fluid level. Low fluid level will cause hesitation. If your fluid level is ok consider changing the transmission fluid and transmission filter. Saturn's have an external filter, so it's very easy to do.
Not finding what you are looking for?