Rover Cars & Trucks - Page 3 - Recent Questions, Troubleshooting & Support

No, not really. Have the codes read for the security. Then we can go from there.

It sounds to me like You may need to have your phone repaired or replaced, but before You do that You may want to check your settings on your phone to make sure that they are all set correctly. The only other suggestion that I can offer You is to do a Factory Data Reset on your phone, this process will erase EVERYTHING ON YOUR PHONE Apps, Photos, Music etc.so before You do this You might want to make sure that EVERYTHING is BACKED UP either to the cloud OR to your phone. NOTE: Before You do this You may need to DELETE YOUR GOOGLE ACCOUNT and any other accounts that You have stored on your phone. DON'T WORRY THOUGH, YOU CAN RE-CREATE YOUR GOOGLE ACCOUNT DURING THE RESET PROCESS. Once the setup process is complete You will need to go to the Google Playstore to reinstall the latest App updates, THIS PROCESS MAY TAKE A LONG TIME. I hope this information is helpful. and I hope that You are able to get up and running.

Get yourself a proper tech.Who has the ability to repair

Check the user manual. If the changer door will not open, there is usually a hole on the changer that you can use to insert a small rod to manually open it (to check the disks). Otherwise, there are no user-serviceable parts in it so you will probably have to remove it and take it to a repair shop.

Check your ground cable,make sure you have a good connection to the frame If it is sulfated R & R the cable.

https://landroverforums.com/forum/discovery-ii-18/what-code-p1590-17819/ You can remove with a code reader. It may come back. I have removed them by taking negative cable off battery for about 15 minutes and then put cable back on. Some cars the radio will stop working when battery is disconnected. If you have ever unhooked the battery before with no problems you should be ok. https://www.landroversonly.com/threads/obd-ii-code-p1590-hell.48834/ https://discoii.wordpress.com/2012/10/22/the-abs-sensors-p1590/

There isn’t in general a starter fuse. If you get nothing when you turn the key and the immobiliser is working correctly, it’s likely to be either a dead starter motor or loose connection.

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today They have full manuals and it's verrrrry cheap and mine I got free in offers 3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins there is one website more but i don't remember its name it was 2 years back bitman something link this Try these out brother

The first thing to try with ant bt issue is to delete your device and pair it again to the system. I think what is happening is the bt mic in the vehicle is hearing the person on the other end and transferring the audio back to them. If possible relocate the bt mic. Next turn vol down. Next check to see if there are any noise cancelling settings on bt menu or in phone settings. Hope this helps but it's kind of a shot in the dark.

The service and repair manual will provide you step by step help to locate and fix the problem on your own easily and you will get the manual from the given link https://toolsnyou.com

Check your battery voltage. Sounds like the battery needs to be charged, or replaced.

Probly a starter and the solenoid not actuating

Service It .

I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem. I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything got it from www.reliable-store.com

was going to make a rude and probably trolly, but accurate, suggestion regarding how to handle Range Rovers in general,. but I will refrain..

Go here put in your spacific model.
https://m.autozone.com/external-engine/spark-plug/land-rover/range-rover

I have heard about car radios being built for specific territories but as yet haven't encountered any problems - every car radio I have owned and my customers have owned, both the manual FM tune and the auto scan have moved in 0.5 MHz increments which has been sufficient to provide acceptable reception on all except weak fringe stations.

When you start your car the battery starts it. When the car is running the alternator makes the voltage to run your car and it recharges your battery. If alternator is not putting out enough voltage then your battery has to run your car and it will get to a point the car shuts down due to lack of voltage. The cars computer now day will starting shutting down thing which use voltage if the car does not need it to run when the voltage get to low. My 2006 cobalt, I lost the radio, A/C and even the power steering electric assist motor when voltage got low. Charge your battery, crank your car turn on headlights and check voltage at the battery it should be over 14 volts even up to over 15 on some cars. If not you may have alternator problem or wiring problems. links with additional info below https://www.youtube.com/watch?v=30ab7ueJ2H8 https://www.youtube.com/watch?v=AzjcZuk7sNg https://www.youtube.com/watch?v=pwiO4nvSbeY

You need a scanner to reset it.