Rover 75 - Recent Questions, Troubleshooting & Support

Question edited for clarity and toss in some CAPS.. Question moved to model category. The power to the OBD Port should be permanently live. Have you checked fuses? Have you had a battery disconnect recently which has caused the engine immobilizer to be activated. https://www.google.com/search?q=Rover+75+Tourer+OBD+pin+out ..

check the fuel pump relay in fuse and relay box. it may be shutting down when it gets hot, replace relay or exchange it for another of the same size to see if thats the problem. also you may have a bad camshaft sensor. good-day !

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

It could be. I always check fuses first. Pull them out and inspect them. Good, put it back in. I pull them, this gets rid of any corrosion problems that may exist.

is there is a coolant or not.

probably as the cable comes in from a different direction the best course of action is to visit the wreckers as the unity may cover more than a specific model so one out of a vehicle a few years either side of yours will ,probably be a replacement

drain and clean fuel tank
try to flush fuel pump or replace
replace fuel filter

How do you know it is working?? if it wont open or close the doors, it might just be a flat battery in the remote. Try changing the battery first.

Three possibilities - either the fob has stopped working, the receiver or other on-car devices has stopped working or the system has developed amnesia and forgotten the code. Using the spare fob might persuade it to work or if you haven't a spare you could try a new battery in the one you do have. A friend left his fob and keys on top of the microwave oven once and it wiped the code from the memory. The owner or user can do little more than fit a new battery. Specialised equipment is needed and no little amount of experience to test the system, diagnose and rectify the faults. The dealer or an auto locksmith would provide the answer.

change boot rubber.

Replace battery and re-sync to car.

Child Seat Restraints - FSB Forums - FullSizeBronco.com

www.fullsizebronco.com/forum/23.../182333-child-seat-restraints.html

Sep 22, 2010 - My rear seat hasnt been mounted in 6 years and my son Wyatt has ....Join Date: Oct 2006 .... Tether Strap Anchor Attachment for the Second Row Center Seating ... With the rear seat folded forward, remove the bolt retaining the rear ..... If you can't track down the part, send me a PM and I will get my Ford ...

Solution for car seat anchor tether - Tundra Solutions

www.tundrasolutions.com/.../119126-solution-for-car-seat-anchor-tether/

Dec 11, 2007 - I have a 2004 Tundra and I just installed a forward facing convertible carseat. It's almost impossible to get the tether strap attached to the ...

Child Car Seat Fitment in Trucks ' IH8MUD Forum

check all your main fuses

Saloon no tourer yes

Possible heater tap valve problem, wrong vacume line connected to it or heater hoses not fitted in correct position on engine causing lock when thermostate opens.

Disconnect battery an have an auto electrician repair wiring,possible air bag may go off if wiring short circuits. ?.....

Ask dealer.

Join here, it's free http://www.the75andztclub.co.uk/forum and ask, there are peoplecare members that sell updated discs.

Fit a new set of wiper blades as this is most often caused when the blades harden from weathering.