Tip & How-To about Chevrolet 1500
1 Turn the steering wheel from side to side until it locks into place. This will make the process a bit easier, as the wheel won't be turning as you work.
2 Remove the horn button in the center of the steering wheel by pulling it off towards you. This will expose the steering wheel nut at the center.
3 Unbolt the center bolt from the steering wheel, using the 1/2-inch ratchet, extension and socket. This might free the steering wheel right away, but most likely you'll have to proceed to the next step.
4 Position the steering wheel puller on the steering wheel such that the center bolt on the puller is on the center shaft of the wheel. Then thread in the bolts supplied with the puller into the two threaded holes on either side of the center shaft on the wheel.
5 Tighten down the center bolt on the steering wheel puller using the 1/2-inch ratchet and socket until the steering wheel pops free. Then remove the steering wheel puller from the steering wheel.
Posted by Gale Todd on
Aug 29, 2012 | 2002 Pontiac Montana
Jun 21, 2011 | 2009 Volkswagen Tiguan
Jun 17, 2011 | 1999 Toyota Sienna
May 28, 2011 | 1986 Chevrolet C1500
May 19, 2011 | Volkswagen Jetta Cars & Trucks
2,945 people viewed this tip
Usually answered in minutes!