Tip & How-To about 2000 Toyota Land Cruiser

Car won't start, battery is good and all you here is a clicing Noise?

The contacts in the starter motor solenoid are worn, the clicking that you can hear is the solenoid being pulled in, but not making contact to allow the main battery voltage/current from getting to the starter motor. Their are 2 things you can do to get you out of trouble, if you are stuck somewhere and cant get going.

Rock the car back and forward whilst in gear, stop and try again.

Tap the side of the starter motor cover with a piece of wood or soft hammer. This will wiggle the contacts and allow for starting.

These may get the car up and running, but ultimately the contacts will have to be replace.

If you can find the starter motor, the solenoid is the small round or triangle box on top or to the side of the starter motor, usually with two small wires going to it.


This is not a big or usually an expensive job to replace. Replace the contacts before replacing the starter motor, a lot cheaper alternative.

Posted by on

2000 Toyota Land Cruiser Logo

Related Topics:

Related Questions:

0helpful
3answers

the motor wont turn over when i try to start the car i here a cluck noise

the brushes in starter worn out.if u can see the starter whack it with hammer couple time then try if it doesn,t start the starter is done.i asume u tried jumpstart first?
0helpful
1answer

2006 A6, battery is charged 100%, worked yesterday, now turn the key hear a little clicking noise but, nothing! not even a sound of turning over! what is the deal and how can i get this started asap!

The contacts in the starter motor solenoid are worn, the clicking that you can hear is the solenoid being pulled in, but not making contact to allow the main battery voltage/current from getting to the starter motor. Their are 2 things you can do to get you out of trouble.

Rock the car back and forward whilst in gear, stop and try again.

Tap the side of the starter motor cover with a piece of wood or soft hammer. This will wiggle the contacts and allow for starting.

These may get the car up and running, but ultimately the contacts will have to be replace.

If you can find the starter motor, the solenoid is the small round or triangle box on top or to the side f the starter motor, usually with two small wires going to it.
0helpful
1answer

When you turn the ignition, there is a slight click but won't crank. The lights work and battery is good.

The contacts in the starter motor solenoid are worn, the clicking that you can hear is the solenoid being pulled in, but not making contact to allow the main battery voltage/current from getting to the starter motor. Their are 2 things you can do to get you out of trouble.

Rock the car back and forward whilst in gear, stop and try again.

Tap the side of the starter motor cover with a piece of wood or soft hammer. This will wiggle the contacts and allow for starting.

These may get the car up and running, but ultimately the contacts will have to be replace.

If you can find the starter motor, the solenoid is the small round or triangle box on top or to the side f the starter motor, usually with two small wires going to it.
0helpful
2answers

Engine won't crank...just get a repetitive clicking. Did not jump start either.

sounds like you need a new starter
hope this helps
give feedback please
Not finding what you are looking for?

2,332 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Loading...