Tip & How-To about Chevrolet Malibu

Error code p0102 on chevrolet malibu

If you are gtting this error code on the code reader then this code relates to their being a problem with the mass air flow meter this is a common fault on this make of car so the chances are it will need replacing.

A garage will be able to run a diagnostic check to pin point the exact cause of the fault so getting this test done would be a thing you should do before repalcing any parts but 9 out of 10 if the times replacing this meter clears this error code and solves the problem.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

0helpful
1answer

2008 Chevy Kodiak c4500 duramax desiel code reader (Innova 3100 Can OBD2) shows P0102, what does it mean

P0102 Chevrolet - Mass or Volume Air Flow Circuit Low Input

Read more: http://engine-codes.com/p0102_chevrolet.html#ixzz38p5k1ZD8

Possible causes - Faulty mass air flow sensor
- Intake air leaks
- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor circuit poor electrical connection

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.


Read more: http://engine-codes.com/p0102_chevrolet.html#ixzz38p5tpWZk
0helpful
1answer

code p1580

Your code relates to throttle motor bank 1 circuit mallfunction, this can be caused either by a wiring fault, the throttle motor itself, or ECM the most common fault is the air flow meter also called air mass meter
0helpful
1answer

i got the code from the OBD IT read a code of 23 and one of 36 now i need to find what it means

code 23 is MAT too low.(mass air temp.) code 36 is Mass Air Flow Sensor Error

The ECM receives a signal from the Mass Air Flow sensor depending on the amount of air entering the engine. The ECM uses information from this sensor to help calculate fuel delivery and spark timing.

Fault Code Description

  • 36 - Mass Air Flow sensor error

    Symptoms

    • Engine stalling
    • Lack of power

    Common Problems Faulty Mass Air Flow sensor,Broken wire to Mass Air Flow sensor,Dirty sensing element in Mass Air Flow sensor

      0helpful
      1answer

      OBD read p1131 manufacturing control fuel air metering on 94 ford mustang. What does that mean?

      think it could mean the mass air flow sensor in the air intake pipe ,but i would test this with a automotive meter and not a code reader to be honest
      0helpful
      1answer

      I have a 2005 Malibu and the engine light is on the code it gave me was P0102 what is that code, and another thing it shifts into gear hard why is that

      hi the error code relates to a problem with the mass air flow sensor this is a common problem with this make of vehicle and the meter will need testing to ensure it is the meter at fault only a garage can do this as they have a diagnostic machine that will give them all the air readings allowing them to pin point the exact error.

      As for shifting hard into gear i take it yours is a auto box if it is the the fluid level will need checking as this can cause the problem you are having.

      Let me know how you get on or if you need further assistance ok
      Not finding what you are looking for?

      2,684 views

      Ask a Question

      Usually answered in minutes!

      Top Chevrolet Experts

      ZJ Limited
      ZJ Limited

      Level 3 Expert

      17989 Answers

      Ronny Bennett Sr.
      Ronny Bennett Sr.

      Level 3 Expert

      6988 Answers

      john h

      Level 3 Expert

      29492 Answers

      Are you a Chevrolet Expert? Answer questions, earn points and help others

      Answer questions

      Loading...