Not sure but if doing belt yourself I will give you important tips. 1) before removeing T/Belt set engine to TDC nr 1 there should be marks on the crank and cam (s) gears that line up with a mark on the block / head. 2) prior to removeing tension to belt get liquid paper & mark cam gear(s) & crank gear to point on block / head. 3) mark T/Belt to cam(s), crank, balance shaft if fitted. 4) release tension & remove belt. 5) transcribe marks from old belt to new belt & make sure correct amount of teeth. 6) fit new belt so YOUR marks line up. 7) have tensioner suply presure to belt. 8) turn motor twice by hand to make sure pistons no hit valves 9) Make sure YOUR marks line up if YOUR marks line up it has to be right. 10) Very IMPORTANT if spring tensioner lossen locking bolt again to take up extra slack in belt. 11) tighten locking bolt. 12) put back together.
I thinking that you are talking about "firing order"... 1997 Dodge Caravan FWD2.4 liter DOHC L4 VIN "B" and 1997 Dodge Caravan FWD 2.4 liter DOHC L4 VIN "X"
×