Proton Cars & Trucks - Page 2 - Recent Questions, Troubleshooting & Support

Good evening can someone please assist me with torque settings for a proton neo 1.6 2007 gen 2 thanks in advance

I thought to myself, "manual gear boxes don't have a neutral safety switch". The safety is that you have to use the clutch and the gear lever, whereas with an automatic, Park is your brake, if you are in Drive and the engine starts, the car will move forward due to the increased revs on start up. I have searched for 10 minutes using a few search queries and it bears out that one doesn't exist. No parts sold under 'proton savvy neutral safety solenoid' either. https://www.google.com/search?q=%22proton+savvy%22+%22neutral+safety+switch%22+location ..

TIMING

That shows the window motor and wiring are good leaving one of the switches. There should be battery and ground at both switch connectors check to make sure, check switches, find the battery terminal on the switch use a test light to check the other 2 terminals as you move the switch it should light in both directions, Now locate the ground wire it has to be the other (middle) wire by connecting the ground clip on the test light to the positive wire you just checked, then check the ground side of the switch the same way as the battery side. Think of a domino with 6 dots one middle dot is battery and the other middle dot is ground when the switch is moved the upper or lower outside dots get battery and ground at the same time when the switch is moved the other direction the other outside dots get the power and ground. I hope this helps. Take care.

proton savvy ...good little car but often wont start ...turns over , no start ...llock it ,eave it , come back will start . when doesnt , kick the clutch pedal in hard 2-3 times ...neutral start switch may be sticky .. put into neutral , depress clutch & brake ...then started !

Place a bulb across the horn. Is it bright when horn is working?

P0335 = Crankshaft Position Sensor A circuit malfunction.

Those aren't fuses, they're the lights which illuminate the VU meters :)

They still make Proton cars? https://www.google.com/search?q=Proton+Saga+1.6.+torque+settings+for+mains+and+big+ends ..

Is this the one under the hood or the one inside the car? The one under the hood is next to the battery and has a simple 'clip on' black cover. The inside one will have a 'clip off' cover on the lower half of the dashboard. If there is a grille you might be trying to access it from the wrong position.

Refer to RenaultClio1.2 manuals.

No relay just fuse.

Replace inner door lock and door handle.

fro 4g15 engines, intake 15mm, exhaust 25mm.

under the dashboard driver side. or below the inner fusebox

https://youtu.be/bHMf_Z3-T70

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today They have full manuals and it's verrrrry cheap and mine I got free in offers 3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins there is one website more but i don't remember its name it was 2 years back bitman something link this Try these out brother

How to set Proton gen 2 fire Oder and crank shaf setting please help and guide me please

Change FOB battery.

If manual trans, check for broken cable. If AT, then transmission is broken.