Proton Savvy - Recent Questions, Troubleshooting & Support

proton savvy ...good little car but often wont start ...turns over , no start ...llock it ,eave it , come back will start . when doesnt , kick the clutch pedal in hard 2-3 times ...neutral start switch may be sticky .. put into neutral , depress clutch & brake ...then started !

Refer to RenaultClio1.2 manuals.

No relay just fuse.

If manual trans, check for broken cable. If AT, then transmission is broken.

Check starter relay and starter motor.

Check alt bat

Hi. Thanks for your question. For proton savvy milliage issue you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

the problem could be the select solinoid, gear stick or wiring

hi, you need a scan tool to bleed the AMT unit. actuatation test do all the test.

hi, the engine speed sensor should replace your engine won't start if the sensor can't read the 0 timing angle point on flywheel.

hi, savvy engine is same with renault engine. there's a flywheel sensor/engine speed sensor between engine and gearbox. change the engine speed sensor. The engine speed sensor is control the ignition timing, if the sensor can't read the 0' angle the engine won't fire up.

petrol pump clogged

Press on the rubber cap until you hear a click.

If it is auto or AMT, use Renaultmatic brand. If manual, any good brand will do. Group SAE80.

You need to have strong jacks and jack stands to do it yourself.Better to have a good mechanic/garage do it for you.

The DTC are historical and current added together. Usually, ABS gives fault if the wheel sensor could read the tyre rotation correctly. This happens when there is dirt on the sensor or the wheel bearing are degraded and makes the wheel wobble a bit. get the wheel bearings on the wheel that is indicated by the error code.

Throttle body needs servicing and resetting by a good scanner.

It is held by a spring with a hook that anchors to the inside of the side panel.

Get it scanned for error codes. This car's ignition coil can give such problem. Don't change anything until you know the error code.