20 Most Recent
2002 Toyota Sienna - Page 5 Questions & Answers
How to replace light bulbs in the dash board of a
Get a Toyota shop manual before you attack the dash. There are a number of screws and clips that are not obvious, and there is a good chance you will get frustrated and break something if you just go at it.
On the Sienna, Your going to remove a good portion of the dash just to change light bulbs on the instrument cluster.
Get a shop manual, and the job will go smoothly. I would have not figured it out half the things is do without the instructions to what i am working on.
I know the dashboard HAS to come off. This may not help but I'm sure if you check the dealer they can give you an estimate of time/labor vs part cost.
Knowing the cost will make you invest in a shop manual, or you can go to Auto Zone or Parts Source for a print out, there free and you can get the parts from there too.
Good luck.
Rear Running Lights Out
Check the 10 amp "Tail" fuse. This controls the running lamps.
Note that the rear bulbs are "dual filament" bulbs, and even though the brake lamp feature works, the running light feature in the same bulb can be bad.
Not finding what you are looking for?