20 Most Recent 2000 Toyota Avalon Questions & Answers


If it has a trunk release it sounds to be frozen..Also some close themselves electrically...But I am sure you would know if it is electric or not..If not check for a trunck fuse in the fuse box or the owners manual would be the best...If it is a manual trunk and is stuck or frozen you should be able to move the trunk latch with a big flat prybar...And if it is out of alignment the adjustment is at the striker that is mounted to the lid and not the latch itself....Hope thhis helps......Metalpoet

2000 Toyota... | Answered on Aug 25, 2018


You have a rear light module itself that went bad its is located in the trunk on the left side behind the side carpet.

2000 Toyota... | Answered on Aug 12, 2018


There are no relays in this system. The door switches communicate with the drier door ECU. The ECU communicates with the body control module and the BCM toggles + and - to the power door locks.

2000 Toyota... | Answered on Jan 22, 2018


Open it remotely? Two clicks on the remote.
Internally, child safety locks located on the back edge of the doors.
With the rocker switch, they should all open.

2000 Toyota... | Answered on Nov 14, 2017


please replaced the sencor

2000 Toyota... | Answered on Oct 11, 2017


Sending unit is inaccurate and needs replacement,

2000 Toyota... | Answered on Sep 24, 2017


make sure if noise come from vvt actuator, check the oil quality

2000 Toyota... | Answered on Jun 28, 2017


If the work was done correctly and the key correctly programmed it would seem the car developed an unrelated fault sometime during the replacement. That isn't impossible but it is a bit unlikely so the chances are greater there is either something wrong with the work or doing the work has created a new fault or the key programming wasn't good.

I suggest you revisit the work and double check everything as a first step.

2000 Toyota... | Answered on Apr 02, 2017


Check in autozone.com (free register). Hops helps, and remember rated this.

2000 Toyota... | Answered on Mar 05, 2017


Check this Location. Should be the same

2000 Toyota... | Answered on Jun 20, 2016


Too old, tired of looking at old posts.

2000 Toyota... | Answered on Jun 12, 2016


The socket 10 MM should fit into the bolt recess fairly well so make sure it bottoms before turning the ratchet.You could use a Torx 55 male socket if your hex is rounded or rusted. Always replace the gasket on the drain plug as well to save yourself the heartache of having to drain again if it leaks.

2000 Toyota... | Answered on Apr 16, 2016

Not finding what you are looking for?

718 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Avalon Toyota

  • Avalon Toyota

Most Popular Question

fix clug up muffer

  • Cars & Trucks
Loading...