20 Most Recent
1994 Toyota T100 Questions & Answers
How do I bypass a neutral safety switch on a 1994 Toyota t100 automatic v6
You don't bypass the switch, you replace the switch or can be dangerous. and the switch send signal to computer to know the gear you select. replacing the switch is easy, just remove the screw holding the linkage and unplug the wire. the new switch have a mark to align on N neutral on you shifter, tight thw two screw and drive safe
Good luck
Remove the lens for the tail light
check to see how you replace the bulb. It it comes out from the rear then the lens and the light body will be one piece. If it comes out the front then there will be screws holding the lens in place.
My 94 t100 is making a squeaking noise when i
im having the same problem. some of witch was my trans. well put new trans in last night and its still there. im hoping for ujoints but its kinda looking like rod bearing. if any one has fixed this problem i would love to know
The speedometer cable on 1994 toyota t100 is not
This vehicle is equipped with speed sensors instead of a cable. If your speed sensor is faulty it will cause the speedometer to malfunction, and the "check engine indicator" to light up. I would still recommend having the vehicle's computer scanned for the error code stored, signaling the check engine light.
My t100 with 30 engine
sounds like you need a set of spark plug wires, this is a common problem with all toy's there is a lot of engine heat that brakes the wires down over time, use a good plug wire with these trucks cheeper is not better. thanks for using fixya and give me a call if you need any thing else......SEE YA
Not finding what you are looking for?