20 Most Recent 1987 Toyota Corolla 2 Door Questions & Answers

I think you should change the wiper motor I had the same problem with my toyota echo good luck

http://www.thefotoartist.com/1987-toyota-pickup-22r-vacuum-hose-diagram.html there you go. hope it helps with your issues. Toyota used the same engine in cars and trucks so it is the same diagram for both. I’m happy to help further over the phone at https://www.6ya.com/expert/dennis_7c5f8bf265aab5e9

Check the timming it could be to fast that causes the motor to keep running its pre egnition.

Line up the cam shaft pulley mark with the mark on the head. Bring the crankshaft pulley timing mark to 0 and put the belt on.

It is similar to my rear wheel drive two door.

The main vacuum line from a vacuum source on the intake goes to the multi-hose valve on the top and the distributor vacuum advance.This multi-valve switching valve is the main connection to the other vacuum hoses on mine. Two lines come in from a vacuum source and thre go out to three components according to tempature. On mine the middle one off to side 1)goes to choke opener and switching vacumm valves mounted on the fenders the other middle one 2)second from top goes to another choke opener and EGR Valve and EGRModulator. The bottom hose connection is on when cold 3)and goes to a part on the carburator to help it run better when warming up a AAP valve.

There is a check valve diaprham thing inline to the EGR vlave on the second line from top.

I have another vacuum line on the drivers side of the carburator that has a check vlave inline but larger it goes to the throttle linkage to help slow the closing of the trottle on rapid deceleration.

Yes

try egr valve

you need to check the igniter, it sometimes bolt up on the engine wall or close to the shock mount. if the igniter is not working you will not get current.