20 Most Recent 2006 Fiat X1/9 - Page 5 Questions & Answers

If Ignition power is at all injectors then it's not a fuse issue . The computer triggers a negative pulse to the injectors to get them to trigger. If there is no negative pulse to 1 and 4 then most likely it could be a wiring issue or computer fault. Regards

did you pump even though it didnt fit if so yes you put diesel in you have to drop the gas tank and flush out the diesel sorry for the bad news but i hope this helped. ,vinny

I found the code p0489 which is stating this exhaust gas recirculation control circuit low I replaced egr boost valve but is still showing p0489, what shall I replce now

Turn the crank shaft to top dead center (TDC) before removing the lower cover. Rotate the cam shaft till the marks line up with the #1 cylinder at top dead center(TDC). It is not a hard job , but Fiat does not give you much room to work so I hope you have small hands and arms.

Your evaporator core drain is most likely clogged up. Find the small hose coming from the firewall under the hood on the passenger side. Make sure the hose is not blocked by any debris.

Hi.

The starter motor is on the lower part of the engine block at the right hand side.

Here 1.9D engine chapter from repair manual

Regards.

Ginko

LED lights have much lower resistance and draw, so the computer thinks the bulbs are blown even though they're working.
The only way to prevent the computer from doing that is to install a regular light bulb on each side in addition to the LED lights.