20 Most Recent 1989 Jaguar XJ6 - Page 7 Questions & Answers

Check to see which fuse is connected for the fan and replace. That should do the trick or you might have a stuck motor in which you might have to replace it.

the fuild is the same type used in a gm prodation model . has the torque converter been drained if so start with about 10 qaurts start the vech cycle it through the gears and check add as need

if it's deisel, coulld it be a turbo problem?

then most likelly your ignition module is bad that one is located by the rt ft fender close to the coil at the passenger side

check for good fuel presure and spark at coil

See if the videos and articles help. First one says is needs a calibration tool. https://www.google.com/search?q=2003+Jaguar+XJ6.+How+can+I+equalise+and+reset+air+suspension+and+ride+height+after+fitting+a+new+sensor ..

Reset yes, just lock and unlock the driver door with the key. Turned off no.

Here's a video that will show you how... Jaguar Type WIPER MOTOR REPLACEMENT

not difficult just unbolt it ,,,same as mine ,easy to do

If you are in a rural area, I would be checking for chewed wiring.

If you want to solve your problem, click on the link I attached https://www.reliable-store.com/products/jaguar-xj6-1986-1994-workshop-service-repair-manual

ff17 is throttle position sensor its the variable resistor on the throttle body or wiring to it thats causing the fault code the car will carry on working but the fueling will not be correct cos its working on get you home system so the ecm uses basic settings to keep the engine running ie, avg temp etc.

from memory the fuel pump relay has a timer part built inside to prime the system at ignition on sounds like its gone down

Hello more than one issue could cause this problem battery alternator short

Hello If the car is driving good with no transmission problems , I would suggest checking the transmission oil and filter

Change your air filter and check the ODBII fault history for a Mass airflow sensor Fault. Let the fault history be your guide to repairs to avoid buying parts you don't need