20 Most Recent 2000 Daewoo Nubira Questions & Answers


Yes I would

2000 Daewoo... | Answered on Feb 02, 2018


Write down a diagram of how the belt runs marked with O to mark where the pulleys are undo or release tensioner remove and replace belt.

2000 Daewoo... | Answered on Aug 27, 2017


You need to determine where the oil is leaking from. Could be oil pan gasket or drain plug. Look for damage to the oil pan. The damage might be minor but bad enough that the pan won't seat tightly on the engine

2000 Daewoo... | Answered on Jun 05, 2017


Start with changing the oil. The oil filter might be plugged.

2000 Daewoo... | Answered on Jun 05, 2016


Hi Brian
Is it stuck ON or OFF?
Is it the same for all belts?
A switch is either a physical one on each belt buckle or a continuity formed between the clasp & the buckle.

Could be a fuse
Either way....
A 12 volt test bulb would be useful here
A quick test across each fuse with ignition turned on.

Good Luck

2000 Daewoo... | Answered on Feb 13, 2016


Does your your alarm ligth stay on when switch car on? If it does then ther is a problem with your car alarm system.

Under your stearing rack is a white box. Take it to your local car alarm dealer to get new car ship and get new ship melted in your key.

2000 Daewoo... | Answered on Jan 02, 2016


there should be no adjustment needed as long as your rear drums are auto adjusting as they are suppose to.

2000 Daewoo... | Answered on Nov 24, 2015


There is 2 possibilities. if it has the marks on the valve cover as in the first picture then use those to align the cam gear timing marks to. If no marks on the valve cover then point the cam gear timing marks at each other as per the pictures then align the crankshaft timing marks as pictured.

25112305-go2qkqusq2vchyq30ywu0a0h-5-0.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-1.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-3.jpg

2000 Daewoo... | Answered on Nov 24, 2015


Correct pressure at the fuel rail should be greater than 35Psi.

2000 Daewoo... | Answered on Nov 24, 2015


Try a check the tepreture sensor if its not working well it cause such problem . Change it if posible. That sensor can cause injector to shurt down they wont allow fuil in the engine .

2000 Daewoo... | Answered on Nov 20, 2015


blown head gasket or even warped cylinder head are possibilities.

2000 Daewoo... | Answered on Jun 11, 2015


Either welsh pugs rear or front will require the removal of manifolds strange the welsh plugs need replacing though would be uncommon it is time consuming have you checked the o ring around the water pump as this is more common

2000 Daewoo... | Answered on Apr 30, 2015

Not finding what you are looking for?

600 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nubira Daewoo

  • Nubira Daewoo

Most Popular Question

car sitting in garage while wont start

  • Cars & Trucks
Loading...