20 Most Recent 2005 Hyundai Santa Fe Questions & Answers


Most Santa Fe model from that year had traction control fitted as standard. Check the dashboard centre console. There will be a button marked like the attached image. Different car makers put them in different places. It could be anywhere from next to the gear stick to up high on the centre of the dashboard.
c4890b49-4d7b-43b2-be77-b71debab0df5-k5my4cxvotf0j5wbi2dp2omj-4-0.jpeg

2005 Hyundai... | Answered on Jan 21, 2019


Hello
The best thing to do here is to take the car to an automotive trim repair shop, the seat will need to have the cover taken off and an appropriate repair made, the trim shop would have the most experience with this type of repair and would also be the most cost conscious place to have it fixed. I have never had this question come up on this year and model so it is not a common issue that is for sure.

2005 Hyundai... | Answered on Oct 28, 2018


ref: linkhttp://www.hyundai-forums.com/lc-2000-2005-accent/152405-tried-replace-rear-brake-shoes-drum-will-not-fit-after-new-shoes.html
The automatic brake adjusters work when the car is in reverse and you touch the brake. They should not lock the wheel however. An inspection of the rear brake assembly on both sides might show the problem. total brake repair might be appropriate on a car that age.

2005 Hyundai... | Answered on Dec 29, 2017


That doesn't sound like an ignition coil. And coils are not expensive, about $20 for most of them.
There may be an ignition control module on the car (which is used to control the coil's circuit for causing spark) but I'm not sure that is what you mean. On GM cars, for instance, this part costs about $40.
The word 'boot' and the 3 prong receptacle do not ring a bell with me, sorry.

2005 Hyundai... | Answered on Sep 03, 2017


Turning the wheel back and forth while trying the key should work. In the future try not to lock the ignition with the wheel turned hard.

2005 Hyundai... | Answered on Aug 30, 2017

Tip

Replace A/C Clutch Bearing


Show how to replace an AC Clutch Bearing on a 2005 Hyundai Santa Fe 2.7L Engine.

on Jul 31, 2017 | 2005 Hyundai Santa Fe

Tip

Replace A/C Compressor, Condenser, and Expansion Valve


I show how to replaced the A/C Compressor, Condenser, and Expansion Valve on a 2005 Hyundai Santa Fe 2.7L Engine.

on Jul 31, 2017 | 2005 Hyundai Santa Fe

Tip

Replace Idle Control Valve


I show where the idle control valve is and how to change it on a 2005 Hyundai Santa Fe 2.7L.

on Jul 31, 2017 | 2005 Hyundai Santa Fe

Tip

Fix Engine Code P0123. Replace Throttle Position Sensor and Clean Throttle Body


I show how to Replace Throttle Position Sensor and Clean Throttle Body to fix P0123 Engine Code on a 2005 Hyundai Santa Fe 2.7L

on Jul 31, 2017 | 2005 Hyundai Santa Fe


It's called a "dead" cylinder and you did right by replacing the cam sensor. Still does it though? Do a ohm meter test on the injectors to find if one is bad. The one that shows the lowest reading compared to the rest is the bad one. Code being P0304 means it's #4 cylinder dead. IF that injector shows a low reading, replace it or have it cleaned professionally. If the test shows all injectors reading the same, 16.5 or so, none are bad. do a compression test on all cylinders, if you find #4 cylinder is on the low side with a compression test, you have a bad exhaust valve and must give it attention.

2005 Hyundai... | Answered on Jul 02, 2017

Not finding what you are looking for?

725 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

84524 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Santa Fe Hyundai

  • Santa Fe Hyundai

Most Popular Question

2005 santa fe leaking coolant somewhere

  • Cars & Trucks
Loading...