2006 Land Rover Range Rover Sport - Answered Questions & Fixed issues


when the battery terminals are removed this tends to corrupt the CPU program . Use a scanner to reset the CPU program and the problem should be solved.

2006 Land Rover... | Answered on Sep 19, 2019 | 300 views


Passenger door has a cover if removed it exposes the manual key insert to open the door with the ignition key

2006 Land Rover... | Answered on Apr 30, 2019 | 88 views


Can you feel some hard jerking passing on bumpy road? Have the suspension checked.

2006 Land Rover... | Answered on Apr 30, 2019 | 3,800 views


If I read right you just want to raise the air suspension and solenoid valves jumper the air compressor and it will fill the airbags

2006 Land Rover... | Answered on Apr 30, 2019 | 108 views


It's either the brake rotor that is warped, or the tires are getting out of round and are not rolling evenly when the brakes are applied. Good luck on this repair.

2006 Land Rover... | Answered on Apr 30, 2019 | 346 views


The brake light fuse lives in the boot on a Range Rover Sport - lift the access panel and its on the Left side in a bank of 4-5 fuses immediately neighbouring the jack slot.

2006 Land Rover... | Answered on Apr 30, 2019 | 628 views


Hello
u'd need a proper manual for this in my opinion
like there are plenty of dealers and online shops that deal in those..
you can get some free at re liable-store and it;s actually really illustrative

2006 Land Rover... | Answered on Feb 20, 2019 | 367 views


Discoonect fuse for radio and see if it resets.

2006 Land Rover... | Answered on Jan 27, 2019 | 641 views


Where is immobilizer location on td5

2006 Land Rover... | Answered on Jun 02, 2018 | 147 views


Hi, I would certainly say this is a fuse problem you should have checked these first, hope this helps. Please leave me feed back: Malcolm Campbell, Thanks.

2006 Land Rover... | Answered on Dec 18, 2017 | 152 views


Check for breaker fuse under hood.

2006 Land Rover... | Answered on Oct 14, 2017 | 62 views


Hi, They are connected look at fuse's this may be the problem. Please leave me feedback, Malcolm Campbell.

2006 Land Rover... | Answered on Sep 23, 2017 | 115 views


If the compressor has to run more than normal, there is likely a fault / leak in the system somewhere which these are notorious for. Check your airbags for leaks / spray all parts with a mist of water and soap to find where your air is escaping from.

2006 Land Rover... | Answered on May 10, 2017 | 200 views


It's supposed to do that. Audio confirmation of locking.

2006 Land Rover... | Answered on Aug 15, 2016 | 64 views


Published: 11-May-2011
Engine - V8 4.4L Petrol - Crankshaft Pulley
In-vehicle Repair
Special Tool(s)

Holding Tool Crankshaft Pulley
303-893(LRT-12-080)
Adapter
303-191-03
Bolts and spacers
303-191-04
Remover, crankshaft pulley
303-588
Remover, crankshaft seal
303-D121
Installer, crankshaft seal
303-1100
Adapter - Crankshaft seal installer
303-1100-01 Removal
  1. Disconnect the battery ground cable.
    For additional information, refer to: Specifications (414-00 Battery and Charging System - General Information, Specifications).
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.
  1. Remove the accessory drive belt.
    For additional information, refer to: Accessory Drive Belt (303-05B Accessory Drive - V8 4.4L Petrol, Removal and Installation).

  1. Remove the cooling fan shroud.
    • Release 2 clips from the cooling fan lower shroud.
    • Release and remove the cooling fan lower shroud from the cooling pack.

  1. Using the special tools, retain the crankshaft pulley.
  1. CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the crankshaft. NOTE: The crankshaft pulley retaining bolt will be very tight.
    Remove the crankshaft pulley retaining bolt.
    • Discard the bolt.
  1. Remove the special tools.

  1. Using the special tools, remove the crankshaft pulley.
    • Collect the locking ring.
  1. Remove the special tools from the crankshaft pulley.

  1. Using the special tool, remove the crankshaft front seal.
    • Remove the outer section of the seal.
    • Repeat the process to remove the inner section of seal.
  1. Check the crankshaft damper pulley and locking ring for damage.
Installation
  1. Clean all the crankshaft pulley mating faces.

  1. Using the special tools, install the crankshaft front seal.
    • Lubricate the seal with clean engine oil.
    • Use the discarded crankshaft bolt with the service tool.
  1. Install the crankshaft pulley.
    • Lubricate the seal with clean engine oil.
  1. Install the crankshaft pulley locking ring.
  1. CAUTION: The screw thread in the crankshaft pulley must be cleaned out before installing a new crankshaft pulley bolt. Install, but do not tighten, the new crankshaft pulley bolt.
  1. CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the crankshaft. Using the special tools, retain the crankshaft pulley.
    • Tighten the crankshaft pulley bolt to 380 Nm (280 lb.ft).
  1. Remove the special tools.
  1. Install the cooling fan lower shroud.
  1. Install the accessory drive belt.
    For additional information, refer to: Accessory Drive Belt (303-05B Accessory Drive - V8 4.4L Petrol, Removal and Installation).
  1. Connect the battery ground cable.
    For additional information, refer to: Specifications (414-00 Battery and Charging System - General Information, Specifications).

2006 Land Rover... | Answered on Jan 27, 2016 | 294 views


Got power coming OUT of the switches when actuated? If so - is power going into the motors when actuated by switches?

2006 Land Rover... | Answered on Nov 09, 2015 | 89 views


then would one not presume the motor has failed .but check for a loose plug under the seat .

2006 Land Rover... | Answered on Nov 09, 2015 | 107 views

Not finding what you are looking for?
Cars & Trucks Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...