20 Most Recent 2003 Hyundai Tiburon - Page 2 Questions & Answers

You have to remove the air intake manifold. The last three are under that. If you dont feel comfortable taking it apart then take it to a dealer.

Check you fuel pressure, If it's low, it cause cause your symptom. Have you checked your timing? Your belt may be skipping, if it's old it could be losing it's teeth, change it before it skips bad enough to cause you valves and pistons to crash into each other. Could be a bad cam / crank sensor also. Pull your codes and see what you OBD II is telling you.

the h 7 bulb is a quartz halogen bulb and if touched with the bare fingers has an extremely short life you have to use gloves when handling the bulbs as the oil from the fingers reacts with the glass when in use and blows the bulbs they will also blow from bad/ loose ground points and if allowed to arc ( as in welding ) will fail quickly you should get 12 volts to both bulbs at one terminal while the other is the grounding wire check for problem relays in the power wire

Hello Kimberly 210, I looked up your ignition to assure MYSELF your key ... is indeed a standard TRANSPONDER. (no idea what country we are talking about...??) That type of response SEEMS to be a SECURITY response... As though ONE of your keys is in trouble... (TRANSPONDER KEYS can be damaged & intermittent) ... My best advice is to get on eBay and find yourself a COUPLE of NEW uncut OEM key replacements... Shop around and find out if you have a cooperating locksmith who will cut and code the keys for you... The BEST price I've paid was $6 per key cut... The worst was $60.. (they ruined my OEM key and sold me a generic (I felt it was deliberate.. my OPINION)). IN ANY CASE: If you wait until the key goes bad a DEALER CAN GET (page 120, 3-10 owners manual) from $300 to $600 for full key service AND that IS NOT INCLUDING the tow charges. Some cars allow you (the owner (nothing found)) to code the keys yourself... but you CANNOT do it WITHOUT at least TWO (2) WORKING KEYS... Sorry... I don't know TIBURON specifics http://www.rockauto.com/en/catalog/hyundai,2003,tiburon,2.7l+v6,1415876,ignition,ignition+lock+cylinder,10041 More Information for STANDARD MOTOR PRODUCTS US673L HYUNDAI TIBURON 2001 2008 GENUINE BRAND NEW BLANK TRANSPONDER KEY... Owner manual (same site has WORKSHOP MANUAL) Hyundai 2003 Tiburon Owner Manual

A few years ago, my Sons Hyundai Sonata had some strange problems with his ABS and brake lights staying on. It turned out , the brake light switch at the bottom of the brake pedal had come loose. I tightened it up and it has been ok ever since. Just a thought but anything is possible these days with all the electronics in cars.

every possibility that the cable is breaking and jamming in the outer housing could be rusted up as well but it is in the cable or cable attached parts

seems as if the trans isnt shifting as it should and needs to be checked (could be the shift solenoid not working properly or gears are sticking)

IS it a stick or auto shift?. If it an auto shift it sounds like a bad map sensor. It is mounted in the air intake system. Any check engine light when this happens?