20 Most Recent
2001 Saab 9-3 Questions & Answers
Abs traction control Saab 2001 9-3
I changed my steering column universal joint and the Anit skid light came on. Reason being the sensor for the steering wheel needed re calibrating on the Tech 2. The computer can sense if the steering wheel is not straight. Two Hall sensors are inside the column module pick up movement from a gear and this is relayed to the Hall sensor. My car has a later steering column universal join so I had to rotate on the spines to get the steering wheel near straight then get it re calibrated. all ok now .
What does "Stability Control Failure" on a Saab
The stability control system uses the abs wheel speed sensors to detect when a wheel is losing traction and would presumably apply the brake on that wheel to maintain traction.
The system is the Vauxhall (GM's British operation) version of a traction control system further refined by Saab's engineers.
Stability control failure means the system will no longer be available to assist the driver maintain traction.
I have problem with saab 93 aero 2000 model 2.0
Check control module and wireing for loose or bad connection. Intermittent problems are hard to diagnose even at shop and can get expensive fast so also try taking off negative battery cable for 1 hour to reset all cars computers believe it or not this fixes 80 percent of intermittent problems
Driver's side high beam on my 2001 Saab CV
No, you haven't missed anything I can think of, but the fact that it was intermittent, then permanent tells me that somewhere therein lies the answer. I admittedly don't know anything at all about "the orange light control relay", but it seems that if that's the problem it would probably affect both sides. Sorry I can't be more help. . .
Not finding what you are looking for?