20 Most Recent 2005 Kia Amanti - Page 6 Questions & Answers

Open the service cover in trunk room.
Reduce the internal pressure of the fuel lines and hoses:
Disconnect the fuel pump harness connector.
Start the engine and wait until fuel in fuel line is exhausted. After the engine stalls, turn the ignition switch to the OFF position.
Disconnect the battery negative (-) terminal.
Disconnect the fuel feed hose and the fuel return hose.

Unfasten the bolts (6) and remove the fuel pump assembly from the fuel tank.
Remove the fuel filter holder and disconnect the connecting hose and the cable assembly, and then remove the fuel filter & pump assembly.

this is a picture showing the fuel filter location. hope help.

Your local Checker or Auto zone can help with a code pull.

Take it to a store that installs radios and CD players in cars, like Best Buy. Go into the installation shop area. Explain what happened and sweetly ask one of the guys to help you remove the CD. He will probably do it for you for free. Give him some money anyway (and a big smile).

is it a new belt

cud hav computer or module issues--a readout scan shud b done-it shows voltages that a tech can decyfer------try using anothr key-chip cud b worn---------or disconnect batt a few --------or pull plug on computer and clean it-pins get dirty-----may reboot to normal--------go to a private shop for scan-not a dealer

master cylinder is going bad or low vacuum