20 Most Recent 2002 Chrysler Sebring - Page 2 Questions & Answers

It's definitely a fuse. I would change out the radio fuse and the fuse that controls your door locks. Fuses don't have to be split to stop working.

You just go to the link I attached I'm sure you will get the solution of your problem 2002 Chrysler Sebring

2002 chrysler sebring Go to online store reliable they have repair manuals I am sure you will get the solution. Here's the link. It's been very helpful for me too !

Whenever you disconnect the battery the computer loses its adaptive memory--the changes from factory programming it makes to compensate for wear. So it has to relearn all those adaptive values. Quit screwing around with the battery and you won't have to deal with it again. OR, keep the memory alive using a jumper pack. Read this post http://ricksfreeautorepairadvice.com/install-a-car-battery/ install car battery

You have a faulty switch timer. Go to your local Auto parts store & have them to do a check on your vehicle diagnostics.

start with the simple things first. Is the starter engaging ? Is the battery strong enough to turn the starter? Keep it simple to start with and go with the "flow chart" method.

the correct method is the heat as it is heat welded in place using a micro wave process ( the same process as welding plastic tarps etc) anything else will be strickly short term and will fail when it is really pouring down to see if the quote is reasonable ring other shops and get quotes from them I would expect that what has been quoted would be in the ball park figure of other quotes