20 Most Recent 2001 Volvo S40 - Page 8 Questions & Answers

0answers
0helpful
2answers

HOW TO ADJUST VARIABLE VALVE TIMING ON S40 VOLVO

You don't! This is all computer controlled and dependant on a variety of sensors. Let me know if you need anything else.
12/20/2012 12:03:18 AM • 2001 Volvo S40 • Answered on Dec 20, 2012
0helpful
1answer

Can coolant be leaking into turbo?

Yes that can be a problem. i had this happen to my 04 Volkswagen Passat. A bunch of steam and blueish smoke came from the exhaust. The problem was that the coolant seal in the turbo was bad and it was leaking. I had to keep putting coolant into the holding tank. Had the seal fixed and that fixed my problem!
12/18/2012 8:22:02 PM • 2001 Volvo S40 • Answered on Dec 18, 2012
0helpful
1answer

My struts is there a way to tighten the struts to make it safer until i can fix it

need to change your top strut mounts i just put new struts on and noticed the noise she was hearing was still there just change strut mounts you will be fine
12/2/2012 5:16:52 AM • 2001 Volvo S40 • Answered on Dec 02, 2012
0answers
0helpful
1answer

I have the code but i dont know how to put it on

Need help,I will guide you.
10/27/2012 7:57:45 PM • 2001 Volvo S40 • Answered on Oct 27, 2012
0helpful
1answer

Have a 2001 Volvo s40. it was low on oil and check engine light began flashing. when I stopped the car, the oil was very very low. begin to see puffs of white smoke. After checking oil and adding 3 q

HelloWhen the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

10/22/2012 1:02:55 AM • 2001 Volvo S40 • Answered on Oct 22, 2012
0answers
0answers
0helpful
2answers

2001 Volvo s40/ takes 5-10 seconds to start.

fuel filter is at right side of gas tank undernieth car
by pumping the gas all you are doing is opening the throttle plates alowing some air.its not uncomin for injection cars with higher mileage to need alittle more air for start up.
check ECT sensor.
clean throttle plates
is check engine light on?
10/13/2012 6:19:37 PM • 2001 Volvo S40 • Answered on Oct 13, 2012
Not finding what you are looking for?
2001 Volvo S40 Logo

798 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Volvo S40
2000 Volvo S40

682 Questions

2005 Volvo S40
2005 Volvo S40

335 Questions

2006 Volvo S40
2006 Volvo S40

175 Questions

2004 Volvo S40
2004 Volvo S40

161 Questions

2002 Volvo S40
2002 Volvo S40

131 Questions

Top Volvo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

S40 Volvo

  • S40 Volvo

Most Popular Question

send photo

  • Cars & Trucks
Loading...