20 Most Recent
1998 Mercury Mountaineer - Page 7 Questions & Answers
Have no brake lights
Have you checked the fuses or relays, if not that check the brake light switch.
Need a diagram for a transfercase model 44-04
Not quite sure as to what you need. Are you talking information on hpw to rebuild it with instructions and pictures like I have here (see below) or are you just talking over all the outside, any sensors. I have it but not sure as to the model you stated. I really don't do transmission other then replace at my shop. If you can tell me what you need and remind me of the vehicle (year, make, model and engine size) and if you have all when drive or the Control-trac that would help. You can email me directly at
[email protected] and I will be happy to help as much as I can and no there isn't a cost for the information.
Help with my Fuse Box Diagram
Accordgin with the Owners Manual...
chec position 27, 15 amperes.
Mountanier Owners Manual.Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.Thank you for using FixYa, have a nice day.
How do i replace headlights
Do you mean the whole headlight assembly or just the bulbs? If just the bulbs it is in the owner's manual. If you do not have an owners manuals you can download one for free from the Ford site in pdf format by clicking
HERE
Gets gas has spark turns over but wont start
if my memory serves me correctly in the uk we dont have them we have the explorer where you have both. anyway apart from that, in the uk an explorer with same fault would most likely to be crank position sensor. or low fuel pressure at rail. hope i helped
Not finding what you are looking for?