1993 Subaru Legacy - Answered Questions & Fixed issues


this link is for the factory service manual for the older legacy that you have. section 4 has the air suspension shown. i don't see anything in there about servicing the unit.
I think you are out of luck for getting the original air suspension repaired. parts to convert to aftermarket air ride or regular strut/spring suspension will set you back considerable funds either way. the labor should be around 4 hours

https://drive.google.com/open?id=0B4H_Uz2vUjAwTUUtaUU5WXFNc1k

1993 Subaru... | Answered on Jan 28, 2018 | 164 views


If it's mega cold in your area, it could be ice. We've had several things not open lately. All due to moisture/condensation freezing.
Just a tho't.

1993 Subaru... | Answered on Jan 06, 2018 | 115 views


hmm thinking --- i suspect the crankshaft sensor first if that doesnt cure the problem then maybe a faulty transistor or chip in the computer ? best i can offer is to ask a local mechanic to have a look or the most likely the cheapest way out ? and dont laugh - the main dealer

1993 Subaru... | Answered on Dec 03, 2017 | 50 views


there might be more than one issue here. its common for the early auto transmissions to not have the extra shims added to the center differential. This causes binding for the front axles and can damage a few parts. There was a recall for this many years ago. The other possibility is the valve body is manufunctioning and not fully engaging the gear your selecting. The fix is to get the valve body overhauled/rebuilt or replaced

1993 Subaru... | Answered on Jul 05, 2017 | 202 views


hi could you confirm the firing order you have? witch pulse signals are being received. thanks

1993 Subaru... | Answered on May 24, 2017 | 59 views


cheapest is go to dealer or locksmith[authorized in auto keys ]and have vin number and proof of ownership and have key made

1993 Subaru... | Answered on Sep 08, 2016 | 57 views


All of us here are sorry to hear that.............

1993 Subaru... | Answered on Nov 21, 2015 | 74 views


In the old days & in models that have not been redesigned in decades it is usually mounted on the fire wall. But most of them these days are built into the alternator. They are not generally a serviceable part but they can be replaced if you can get it off the car and to a shop that rebuilds alternators and starter motors. Other wise the way most repairs are made by replacing the entire alternator.

1993 Subaru... | Answered on Aug 03, 2015 | 91 views


refill rad start car wait 3- 5 min now look in rad since you never put rad cap on

if low fill
if not low check temp gage if high them it's time for thermostat if reaching temp slowely make sure rad fan coming on
no fan ? check fuses and releys both good then it's a sensor and will likely require a quick trip to see boby da mechanic

1993 Subaru... | Answered on Apr 18, 2015 | 352 views


Trasmission cooling line pipe are coroded and leak oil could be oil gasket many thing can be the probem

1993 Subaru... | Answered on Apr 02, 2015 | 42 views


Depending which fuse your looking to change. I don't think there is an actual box. I know flashers,abs,horn etc..
are plugged in just under your column.
The rest of your fuses are located under hood. Hope this helps.

1993 Subaru... | Answered on Mar 06, 2015 | 54 views


Fuel filter is probably located in fuel tank. Although a few older American cars had one located on the frame, under the car.

1993 Subaru... | Answered on Feb 16, 2015 | 137 views


Front fender? Lift the hood, open the front door on the same side as the fender to be removed. Under the rim of the hood, you'll find a line of bolts holding the top of the fender in place. Inside the door opening, you'll find one or two more bolts holding the rear of the fender in place. You may also find one bolt under the rear corner of the fender, fully underneath the vehicle. You'll also need to remove the turn signal housing, any side marker light, and possibly the headlight - all with screws - and you may still find one bolt up front, where a steel strut holds the frontmost bottom corner of the fender in place.

When you get all those fasteners removed, you pretty much just wiggle the fender off the car.

1993 Subaru... | Answered on Jul 31, 2014 | 134 views


Ignition switch is a good place to start, you may want to check the starter itself (PIA to pull and test because of its location), or you can always take it to autozone and have them run an electrical diagnostic (most of them do it for free and it takes 2 minutes), if that checks out, you can be assured it's either the ignition or wiring. Keep us up to date, and good luck.

1993 Subaru... | Answered on May 29, 2014 | 138 views


not a alot of detail to go on. Some older Soobs have had crank position sensors fail and that will kill the igntion.

1993 Subaru... | Answered on May 19, 2014 | 29 views


Should be on with headlights. They are called tail lights if only one on you have one bulb blown.

1993 Subaru... | Answered on Apr 15, 2014 | 91 views


Are we talking a window problem or an engine complaint. When you say so much gas, please quantify that.

1993 Subaru... | Answered on Mar 18, 2014 | 83 views

Not finding what you are looking for?
1993 Subaru Legacy Logo

451 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts

Marvin
Marvin

Level 3 Expert

84565 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...