20 Most Recent 1996 Mercury Sable Questions & Answers


Do a complete P.S. fluid flush. Running the system when low can burn the fluid.

1996 Mercury... | Answered on Mar 01, 2018


you can get one from a dealer spares
that will allow you to see what it looks like and find it in the vehicle
I consider that the dealer may be touching your wallet as a reprogram of the immobilizer is all that is necessary

1996 Mercury... | Answered on Nov 03, 2017


If no check engine light then you have a failing transmission which is unfortunately common in this year.

1996 Mercury... | Answered on Jul 15, 2017


have vehicle scanned for trouble code the code will give area of problem --most likely problem with a sensor or a hub going bad after scanning you can pull the fuse for abs so you have normal braking

1996 Mercury... | Answered on Jun 08, 2017


If all the items you listed were replaced then you have either a ground breach where no ground is reaching the negative post of the headlamps or there is no power source connection. Start with verifying power to the headlamp switch. If yes, verify power from the relay. If yes, verify power to the terminal at the headlamp. If yes, start with the ground circuit. If there is no ground connection you can save years of frustration by fabricating a new ground circuit from the body to the headlamp ground terminal. I'm going o get frowned upon for that but, hey, if it works for the time being, right?

1996 Mercury... | Answered on Oct 23, 2016


Taking a wild guess here but could be a theft system problem.

1996 Mercury... | Answered on Oct 22, 2016


speed sensor failure

Symptoms of a P0500 DTC may include
: loss of anti-lock brakes the "anti-lock" or "brake" warning lamps on the dash may be lit the speedometer or odometer may not work properly (or at all) your vehicle's RPM limiter may be decreased the shifting of an automatic transmission may become erratic other symptoms may also be present

Read more at: https://www.obd-codes.com/p0500
Copyright OBD-Codes.com

1996 Mercury... | Answered on Oct 15, 2016


If 5A fuse 13 in the I/P fuse panel and the blower motor relay are not defective, the motor will have to be replaced.

1996 Mercury... | Answered on Oct 11, 2016


you get a key and fob or buy a new steering colunm and body control module

1996 Mercury... | Answered on Sep 05, 2016


It sounds like you may have a defective ignition starter switch. It is located near the bottom top of the steering column under the dash.

1996 Mercury... | Answered on Jun 14, 2016


sounds like a cracked Vacuum line to the Heater door

1996 Mercury... | Answered on Mar 02, 2016


I'm not 100% on this one but 99.9% sounds like the body control module was reset. The car would have to be brought to the dealer to SYNCH the BCM & security system. Possibly just SYNCH just
the remotes to the car. Good Luck, Frank M

1996 Mercury... | Answered on Feb 21, 2016


Bad alternator will do that . even the radio will do that .daughter had to have the unit in her trunk unplugged

1996 Mercury... | Answered on Oct 07, 2015

Not finding what you are looking for?
1996 Mercury Sable Logo

624 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

gerry bissi

Level 3 Expert

4387 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sable Mercury

  • Sable Mercury

Most Popular Question

1996 sable serpentine belt

  • Cars & Trucks
Loading...