Top 20
1994 Lexus GS 300 Questions & Answers
1994 lexus gs 300
Did that shop show her the OBDII scan print out to justify any recommended repairs? Now you don't know what you've got or what the original problem was. How did the wiring get tangled up? Always let the OBDII scan print out of the stored fault history, be your guide to any repairs. You have to watch these shops, they will build you a new car at twice the cost.
How to adjust tps
The best way replace with new one first check for codes before do anything.
I have a1994 Lexus gs 300. My quarter panel was hit and now my. Rear wheel is wearing out on the inside. What happened?
Well, if you were in an accident on the rear quarter panel, I might think that the wheel could have gotten hit as well causing it to be out of alignment. If your vehicle was repaired after the accident, I would return it to the shop and let them know that you are having issues with the tire wear and see if they can submit a supplemental to the insurance company to cover any part replacement, labor, and tire replacement. If your vehicle was not repaired after the accident I think I would take it to an alignment shop before the tire is completely worn out.
1994 lexus gs300
Could be a faulty injector. Or a problem with the wiring harness or the engine computer.
How to check codes by jumper wire
On the 94 models there is a rectangular service connection box near battery lift lid and jumper te to e1 then turn key on (do not start car) watch the check engine light flash the first sequence is ten series and a pause then single digits next repeat then next code and keep going and will start over.
Car turn off
Have the distributor ignition module tested/replaced and test the coil as well as it appears that the unit/s are overheating and failing
Not finding what you are looking for?