1999 Honda Accord - Page 9 - Answered Questions & Fixed issues


you can not just replace that part.will not fit on correctly. .you must replace the full throttle body try find good one kown to work found online.

1999 Honda... | Answered on Dec 19, 2013 | 34 views


honda sells it, so does helm.
but 1999 is here too, in whole or part.
http://hondatech.info/downloads/Auto/Manuals/Accord/

1999 Honda... | Answered on Dec 16, 2013 | 86 views


which engine, they have many,
displacement, and cylinder count.
I4 or V6
and size.
or do like us . we go to alldata.com and look it up.

there are 2 belt systems. Serpentine belt (use the tensioner)
and V belts
which is yours?,it varies by engine and country , and neither stated.

in usa.
2.2.and 2.4L the vbelt at ALT i at 7o-clock on alt facing alt. and adjuster screw shaft
the 2.7L has an idler pulley that you adjust.
post engine. and country.?

1999 Honda... | Answered on Dec 13, 2013 | 202 views


you blew the fuse. replace all bad fuse in the fuse boxes.

1999 Honda... | Answered on Dec 14, 2013 | 76 views


check main relay for solder cracking around pins and resolder

1999 Honda... | Answered on Dec 13, 2013 | 152 views


P0336 Honda - Crankshaft Position Sensor 'A' Circuit Range/Performance

Possible causes
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery

1999 Honda... | Answered on Dec 13, 2013 | 407 views


4 cylinder or 6cylinder engine, (options) displacement what is that.??/

here is the page that answer what it is.
http://engine-codes.com/p1279_honda.html


it means, the Var. valve timing is not happening when expected.
why?, is complex.!
if serious DIY>?: are you, with full shop and tools? gauges, meters?
then read the FSM.
its all there, the tests. get the FSM from Honda.
do you only want a random guess ,?

1999 Honda... | Answered on Dec 05, 2013 | 264 views


have spark at 1 cyl or ALL?
which of the 5 engines.
never post engine problems without your engine options
the VIN? (digit 8? is engine code)
or the displacement.?
or hood tag, shows honda engine code. F22, 23, 27, 30?

ok if you have spark times 4 or 6
and if engine has good 60k mile tune up. then spark is good
after all a tune up is not just throwing parts, its checking spark too and timing. (if timing is found way off, the timing belt is slipped and boom blown motor next, so I always check timing, (spark) .
next is fuel, (we pretend compression is good and walk the line of dreams) and
check for dry spark tips or wet
dry no fuel, try test fuel.
soaking in raw fuel, timing belt slipped, or just flooding from bad fuel
or its -30F outside and running summer fuel?

ill let you watch scotty, (its generic, and assume engine is good)

http://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

1999 Honda... | Answered on Dec 02, 2013 | 65 views


most pads , no all have noise makers , telling you pads too thin.
ever look a the pads?

1999 Honda... | Answered on Nov 27, 2013 | 134 views


with key metal part or the fob button part?

1999 Honda... | Answered on Nov 26, 2013 | 23 views


A/t or m/t
nobody can guess. auto or stick,,
old post.

1999 Honda... | Answered on Nov 26, 2013 | 25 views


open hood.
see battery, see the 2 cables, the plus cable goes to the starter
follow it.... and bingo. starter. it will be near the flywheel ring gear.

1999 Honda... | Answered on Nov 25, 2013 | 115 views


it is.
the switch takes a beating, 14 years, of shifting, add that up>
huge.
adjust it, and if still bad replace it...... so easy...

the switch is just a simple switch, METAL, brass .
it closes and passes the crank signal 12v to the starter.
if it dont pass the 12v, its bad, (baring rare shorted soleniod)
the voltage on the wire, clutch depress is the BIG clue. as to what is bad 0v is bad switch, 6v is shorted line.
0v bad.
1v to 8v bad short in line, (more tests)
10v to 12 volt normal cranking (unless in N.Pole)

1999 Honda... | Answered on Nov 25, 2013 | 34 views


2000 RPM , jump
so is it a A/T or M/T , auto or stick gear box.?????

1999 Honda... | Answered on Nov 27, 2013 | 63 views


here is a link hope it helps

http://www.youtube.com/watch?v=co6yD0UfxIk

1999 Honda... | Answered on Nov 21, 2013 | 172 views


that means the cable is not attached put it back on !!

1999 Honda... | Answered on Nov 21, 2013 | 23 views


A/T or M/T (stick)
in any gear, wont move.
no trannys options stated, so can answer
hand brake off?
can you race motor to 2600 rpm for 1min, and its does so normally in netural.?

1999 Honda... | Answered on Nov 21, 2013 | 116 views


post now , 100s of times, try searching.
in short , you failed to read the operators guide, for sure.
it tells you this.
1: new car, put code card in BR dresser.
2: write the number (ask radio when working) in the opr. guide, on last page.
3: if lost , only the dealer can give it to you, or IN USA? any key shop with he specical license to do so.
sorry there is no WIKI-Leaks.com on radio codes.

my guess you lost this free book?
http://justgivemethedamnmanual.com/honda/honda-accord-owners-manuals/

1999 Honda... | Answered on Nov 20, 2013 | 136 views


you need comma's bad. (old post., doing 0 answers for 60 days)
are you saying it overheated after a new head gasket? i sure can not tell. my guess, not, my guess is this.
car overheated (first)
compression flat on x cylinders.
so i check head for warp, not warped (.002' max) so tried a new head gasket.
hook up computer , (scan tool, you mean the OBD2 scan tool?)
sure , the immobilizer.
the car engine brain, is called PCM, not connected kills all spark and fueling. in fact all that is PCM , created, all the time.
so what computer? some cars have 12 on board,

the service manual is there. see ISC?
http://hondatech.info/downloads/Auto/Manuals/Accord/

the shifter has a park lockout and has a bypass. feature, see the
operators guide for bypass steps.
these the lost operators guide here, for how the IMMO works.
http://justgivemethedamnmanual.com/honda/honda-accord-owners-manuals/

my guess, is you figured all IMMO issues, and reset it and configured it.

1999 Honda... | Answered on Nov 16, 2013 | 199 views


that means one of the devices connencted to fuse 10 is shorted .
preventing the fire.
see yours here, see electr sections on fuse 10.

http://hondatech.info/downloads/Auto/Manuals/CR-V/

1999 Honda... | Answered on Nov 14, 2013 | 35 views

Not finding what you are looking for?

1,593 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,940 Questions

1991 Honda Accord
1991 Honda Accord

2,649 Questions

1995 Honda Accord
1995 Honda Accord

1,606 Questions

1996 Honda Accord
1996 Honda Accord

1,608 Questions

1998 Honda Accord
1998 Honda Accord

1,531 Questions

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...