Top 20
1998 Honda Odyssey Questions & Answers
Hi, I want to know step by step, how to fit a cigarette lighter socket in a 1998 Honda Odessey.
buy socket this will determine where and how its mounted ---if surface mount screw onto location where not interfer with any components --shifter -controls etc--- same if have to drill a hole -----wire up the socket run neg /ground to a ground wire or metal bracket ======positive /hot choice tap off accessory which will make socket hot when key turned on or battery which makes it live all the time
11/11/2021 7:08:31 AM •
1998 Honda...
•
31 views • 0 helpful votes
Brake locking up
the calipers sticking or an air lock in the lines need to be bled
12/17/2017 12:18:03 PM •
1998 Honda...
•
168 views • 0 helpful votes
Key igniton
sounds like the tumblers in the igniyion barrel are worn , is the key very worn ? if so i'd get a new barrel and key
12/22/2014 6:33:34 AM •
1998 Honda...
•
32 views • 1 helpful votes
Dtc 1456 1998 honda
Apparently this code is a tricky one and hard to pinpoint it's problem and fix. I have seen it clear with just a new gas cap. Seen it clear by running nearly out of gas and filling up. I have seen it clear up with using higher octane gas for a couple of tanks. Many dealers cringe when cars come in with this code, because nothing appears wrong on their scanners, so they clear it and drive for a few miles and give it back to customers with a bill and a "we couldn't find anything wrong with it". Read the following Honda Forum post and make your own decision. Good luck.
P1456 Evap Emission Control System leak Drive Accord Honda Forums
4/20/2014 8:04:05 PM •
1998 Honda...
•
306 views • 1 helpful votes
Leak under distributer
The most common cause is the heater hose coming off the head, below and behind the distributer. Usually the distributer is leaking oil, which gets on the hose and damages it. If you don't fix the oil leak, which could be the distributer "o" ring, (inexpensive) or the distributer shaft seal, (expensive) cut a piece of the old hose and use it to protect the new hose from the oil.
4/12/2014 5:26:35 PM •
1998 Honda...
•
124 views • 0 helpful votes
Inside of front tyre going bald
Just one tire or both? Likely you need an alignment done, but other things can cause tire balding and cupping. Brakes pulling to one side or other can also cause tires to wear prematurely and unevenly. Worn Shocks/Struts are also culprits. Worn or broken bushings in the suspension. Also, bearings starting to seize up can cause this as well. In other words, a BUNCH of things can cause the problem. If you have no issues with steering, handling, braking, it is likley just a simple alignment is needed. Take it in to a reputable place and they can diagnose the exact cause and suggest repair needed. Good luck.
3/18/2014 10:35:22 PM •
1998 Honda...
•
166 views • 0 helpful votes
Cutting out
why don't you try changing the ignition cylinder
2/27/2014 10:02:27 PM •
1998 Honda...
•
117 views • 0 helpful votes
Not finding what you are looking for?