20 Most Recent
1990 Honda Prelude Questions & Answers
Honda prelude grinding noise when braking
Better inspect them again. If you have grinding noise when braking. It's only one thing the brake pads are rubbing on the rotors. Now the question is which front wheel. Remove the brakes and inspect the caliper see if it's not sticking and the sliders. Then inspect the pads and the rotor for a ridge that can cause noise when the pad rubs the ridge. Just looking at the wheel won't be enough you have to remove the parts to find the problem
93 prelude si transmission trouble
As the commenter said, check if the tranny fluid is full. A clear pink or red is best, a dirty brown or cloudy color is probably trouble. It's a '93- it is 24 years old, everything wears out eventually. I'm as old as the hills myself, and I can't run anymore. Start looking for a replacement transmission, or have a transmission shop diagnose it. Unless you are attached to the car, don't let them talk you into a new transmission-the cost may be more than the car is worth. You might want a used unit- try to get ANY kind of warranty-even 30 days is better than nothing. If it lasts beyond 30 days without a problem, it might go another 24 years---pshaw! not really.
Seat belt
if it wont undo from the buckle you will have to unbolt the belt at its anchor points and take to a garage to see if the buckle can be repaired or just put a new one in
Cooling fan loose
Hi Sandy,
it is hard to do by yourself and major problem is reaching that area is not much easy.and sometime the fan pinion is loosen by itself and sometime motor shaft key lost or it can be loosen nut.
but you must see the mechanic ,
its good idea.
regards.
nuwan
92 honda prelude no compression
if is a H22a4 or h22 motor, u need to get the timing marks lined up then put the belt on, make shure it is a h22 bent and not a F22 SOHC belt
How do you get to the speed sensor on a 1990 honda
I had to take my whole breather assembly out to reach it. Once out it will be on top of your transaxle but its still a little tough to get to because of the hoses on top of it. It took about 2 hours to replace.
Not finding what you are looking for?