Top 20
1991 Volvo 940 - Page 8 Questions & Answers
Keys locked inside my Volvo s40 2007 trunk is open can I access my car through the trunk
This is one of those 'Yes - No' answers. Rear seat that drop were an option on the V40 so the answer could be no. Take a look through the left side of the back window at the rear parcel shelf, next to the left head rest. Your looking for a small push button panel, about the size of cigarette box, with two buttons on it. If it's not there the rear seats are fixed into position. If there is one there you might be able to 'trip' the lock spring from inside the trunk. This method is for a much newer model so it might not work. Look inside the trunk, high up on the rear seat where the flat of the seat meets the parcel shelf. There should be a metal rail going all the way across the car. I've attached a photo. Looking straight up at it there are holes in it and you should be able to see a spring or a cable through one of them. Using a chunky, flat blade screwdriver you might be able to 'flick' the latch to release one side of the back seat. The spring is a strong one sort will fight you. To do this you'll be lying with you legs hanging out of the trunk wrestling with it, Probably swearing a lot as well. If you manage to drop the back seat you probably need a small person to wriggle through the hole as I think the rear seat pad needs to be lifted for it to drop all the way.
Volvo fl 10 valve clearance
The valve clearance specification for a Volvo FL10 truck depends on the specific engine model and year of manufacture. Generally, the valve clearance for the FL10 truck with a Volvo D10 engine should be checked and adjusted as follows:
Remove the valve cover: Remove the valve cover to access the valves.
Rotate the engine: Rotate the engine to the top dead center (TDC) position for the cylinder you want to adjust.
Check the valve clearance: Use a feeler gauge to check the clearance between the valve stem and the rocker arm. The specification for the valve clearance should be listed in the engine service manual.
Adjust the valve clearance: If the clearance is not within the specified range, adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw. Tighten the lock nut when the clearance is correct.
Repeat for each cylinder: Repeat the above steps for each cylinder.
Reinstall the valve cover: Once all the valve clearances have been checked and adjusted, reinstall the valve cover.
It is recommended to refer to the engine service manual for specific instructions and specifications for your particular Volvo FL10 engine.
How to change 2007 Volvo S40 2.4L lower Intake manifold gasket and valve cover gasket
the service manual covers all that ,every step.
battery lug NEG - pulled first. (isolated)
step 2 ,
depressurize fuel line, not get gas in eyes.
tell the kids to not smoke or uncle Fester too.
i PULL THE FUEL PUMP FUSE OR RELAY AS ENGINE RUNS AND HEAR IT SLOWLY DIE IN SAY 1MIN OR SO,..NOW CAR IS SAFE TO WORK ON.
NOW LEARN THERE ARE TOOLS TO OPEn a line
and I have no idea what Volvo uses, but the manual will call it out. (OR GOOGLE IT TO LEARN FOR VOLVO)
some fuel lines conns have built in latches, to trip
Read IT.
seen here.
https://eautorepair.net/Marketing/Default.asp
2010 xc60 volvo Does the throttle body have to be reset after cleaning
Yes, it is recommended to perform a throttle body adaptation or reset procedure after cleaning the throttle body on a 2010 Volvo XC60. This is because cleaning the throttle body can remove built-up carbon deposits and change the air flow through the throttle body, which can affect the engine's idle speed and performance.
To perform the adaptation or reset procedure, follow these steps:
- Reinstall the cleaned throttle body and reconnect all electrical connectors and hoses.
- Turn the ignition key to the "On" position, but do not start the engine.
- Wait for 30 seconds to allow the throttle body to initialize.
- Turn off the ignition key and wait for 10 seconds.
- Start the engine and let it idle for 10 minutes with all electrical accessories turned off.
- Turn off the engine and wait for 10 seconds.
- Restart the engine and take it for a test drive to ensure proper idle speed and performance.
If the engine still does not idle well after performing the throttle body reset procedure, there may be other issues causing the problem, such as a vacuum leak or a faulty sensor.
Not finding what you are looking for?