20 Most Recent 2004 Chrysler Sebring - Page 3 Questions & Answers

0helpful
1answer

My 2004 Chrysler Sebring Sedan will only start from a jump. It runs after cables disconnected but runs hot shortly after. If I switch it off it will not restart. Any idea what might be the problem?

Either a weak starter or battery is causing the start issue. As for running hot, not a related problem.
5/10/2017 12:10:39 AM • 2004 Chrysler... • Answered on May 10, 2017
0helpful
1answer

Loud rear rubbing sound at speed.

It sounds like your rear brgs are "tracking". This means that the outer casing of the brgs are turning a bit at regular intervals in the housing. It does not happen when coasting, only under load. Col
4/26/2017 10:11:22 AM • 2004 Chrysler... • Answered on Apr 26, 2017
0answers
0helpful
1answer

Locating rear heated oxygen sensor bank 1 on 2.4L 2004 chrysler sebring

It is the sensor that is just behind the last main catalytic converter in the exhaust. If I had the code I could help more.
2/15/2017 12:31:57 AM • 2004 Chrysler... • Answered on Feb 15, 2017
0helpful
1answer

04 Chrysler Sebring cranks and won't start. I have changed the plugs, wires, and distributor. I have a 3.0 engine

Standard practice is check for spark at each plug when you crank. If you're getting spark, then check for fuel getting to cylinders.
2/6/2017 8:39:22 PM • 2004 Chrysler... • Answered on Feb 06, 2017
0helpful
1answer

How to reset kill switcj om 2004 chrysler sebring

If you are referring to the old inertia switch for fuel shut off during a crash, the manufacturers don't use these any longer. The airbag system is connected to the fuel pump relay through the ECM. When the airbags deploy, the fuel pump stops. This system involves using the standard fuel pump relay. When the relay or associated circuitry fails, the fuel pump wont come on.
2/3/2017 5:09:37 PM • 2004 Chrysler... • Answered on Feb 03, 2017
0helpful
1answer
0helpful
1answer

Need to no how to change out the whole fuse box on a 2004chrysler Sebring sadan 2.4 letter

It's not rocket science . Unbolt it from the vehicle ,unclip it . What ever holds it down . Turn it over , all the connectors are bolted to the bottom . unscrew them pull them out .
1/27/2017 11:08:52 PM • 2004 Chrysler... • Answered on Jan 27, 2017
0helpful
1answer

2004 sebrings dim lights are very dim, only one bright light works and the high beam indicator stays on on the dash

I had a similar problem with my 2003 Dodge Stratus which is similar to the Sebring the problem was the headlight switch
1/21/2017 12:02:48 AM • 2004 Chrysler... • Answered on Jan 21, 2017
0helpful
1answer
0helpful
1answer

2004 sebring won't go into drive untill engine warmed up after that drives fine all day till next morning

HI, Check your Transmission Fluid (ATF) level. There should be instructions in the Owner's Manual or search (Google) online. GL, TD
12/15/2016 8:06:46 PM • 2004 Chrysler... • Answered on Dec 15, 2016
Not finding what you are looking for?
2004 Chrysler Sebring Logo

1,852 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sebring Chrysler

  • Sebring Chrysler

Most Popular Question

service chrysler sebring convertible top

  • Cars & Trucks
Loading...