20 Most Recent
1996 Chrysler Sebring - Page 6 Questions & Answers
Car has power but will
have your hood on and have someone check to see if your starter is making a clicking sound at all most likely its the starter if its not clicking means its bad and needs to be replaced. I had to do that on my car too when my starter totally stopped working on me. Check this first. when the starter clicks means its ingaging the engine.
Where do I find a fuse diagram, I have fuse out
You don't need to change any fuses
You can remove them to test or leave them
in the panel and test across the two exposed
contacts with a volt meter
Fuses don't fix things
What is the problem your working on?
Hi! I'm looking for a diagram of the master
just put something underneath and catch the fluid ,then when you have finished and refill you will have cahnged the brake fluid anyway ,if the brake pipe is corroded then you live in a wet climate and the fuid needs changing more often than in a desert climate.
Why do my spark plugs keep fouling? Car
Hello jonbon742, if you haven't already, change your air filter. 75% of the time when people have the symtoms you do it is caused by the air filter.
Best of luck my friend!
I have a 1996 chryster Sebring Convertible jxi
I have a car just like yours. My car use to do the same thing. When I checked for a code, it showed nothing. I would be driving down the road, sometimes 50-60, and it would just cut off. I bought a MAP sensor and that fixed my problem. Hope that helps.
Starter turns but won't start,not fring
I would start testing the fuel system. Does you fuel pump kick on? If your vehicle is getting gas, it might be in your ignition system. Need to find out if you are getting a spark. It may even be your computer. You should test the ignition system, it might be a distributor, distributor cap, or rotor.
How to remove the engine on a 1996 Chrylser
This is a very complex question. It is quite a job to remove an engine. I would suggest going to the library and checking out the manual for your car. This will give step by step instructions. If I tried to tell you step by step, I know that there would be points that I would leave out accidentally. The manuals are free to check out. And it is well worth the time to go get one.
Car starts fine but when you press on the gas its
I had this same problem. The mass air flow sensor was my problem. If your check engine light is on then you can take it to Autozone and they will check it out for free. But my problem was the MAF sensor.
Not finding what you are looking for?